[1] Chaffin, C., et al. Experimental investigation of premixed combustion within highly porous media. in Proceedings of the 1991 ASME JSME thermal engineering joint conference. 1991.
[2] Howell, J., M. Hall, and J. Ellzey, Combustion of hydrocarbon fuels within porous inert media. Progress in Energy and Combustion Science, 1996. 22(2): p. 121-145.
[3] Khanna, V., R. Goel, and J. Ellzey, Measurements of emissions and radiation for methane combustion within a porous medium burner. Combustion science and technology, 1994. 99(1-3): p. 133-142.
[4] Trimis, D. and K. Wawrzinek, Flame stabilization of highly diffusive gas mixtures in porous inert media. J Comput Appl Mech, 2004. 5(2): p. 367-381.
[5] Bubnovich, V., et al., Flame stabilization between two beds of alumina balls in a porous burner. Applied Thermal Engineering, 2010. 30(2-3): p. 92-95.
[6] Charoensuk, J. and A. Lapirattanakun, On flame stability, temperature distribution and burnout of air-staged porous media combustor firing LPG with different porosity and excess air. Applied Thermal Engineering, 2011. 31(16): p. 3125-3141.
[7] Catapan, R., A. Oliveira, and M. Costa, Non-uniform velocity profile mechanism for flame stabilization in a porous radiant burner. Experimental Thermal and Fluid Science, 2011. 35(1): p. 172-179.
[8] Wu, D., et al., Experimental investigation on low velocity filtration Combustion in porous packed bed using gaseous and liquid fuels. Experimental thermal and fluid science, 2012. 36: p. 169-177.
[9] Keramiotis, C., et al., Porous burners for low emission combustion: An experimental investigation. Energy, 2012. 45(1): p. 213-219.
[10] Keramiotis, C. and M.A. Founti, An experimental investigation of stability and operation of a biogas fueled porous burner. Fuel, 2013. 103: p. 278-284.
[11] Al-Attab, K., J.C. Ho, and Z. Zainal, Experimental investigation of submerged flame in packed bed porous media burner fueled by low heating value producer gas. Experimental Thermal and Fluid Science, 2015. 62: p. 1-8.
[12] Shakiba, S.A., et al., Effects of foam structure and material on the performance of premixed porous ceramic burner. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2015. 229(2): p. 176-191.
[13] Ghorashi, S.A., et al., Experimental study on pollutant emissions in the novel combined porous-free flame burner. Energy, 2018. 162: p. 517-525.
[14] Chaelek, A., U.M. Grare, and S. Jugjai, Self-aspirating/air-preheating porous medium gas burner. Applied thermal engineering, 2019. 153: p. 181-189.
[15] Muthukumar, P. and P. Shyamkumar, Development of novel porous radiant burners for LPG cooking applications. Fuel, 2013. 112: p. 562-566.
[16] Hossein Soltanian, Mehdi Maerefat, Mohammad Zabetian Targhi, On the drastic improvement of porous burner efficiency,
Thermal Science and EngineeringProgress,
Vol 41, 1 Ju 2023, 101832.
[17] ISIRI 10325, Domestic cooking appliances burning gas Specifications and test methods, vol. 3, no. 1, 2007.
