Abaspour Fard, MohammadHossein Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Abbasi, Mehdi Development of Kinetic Model for Diesel Combustion and Correction of the Relevant Parameters in Gas Turbine Control System [Volume 17, Issue 1, 2024, Pages 98-114]
Abbasi, Mehdi Kinetic Modeling and Route Analysis of Standard LNG Mixtures Combustion, based on Auto-ignition and Methane Content [Volume 19, Issue 1, 2026, Pages 1-23]
Abbasizadeh, Saeed Desulfurization of model diesel fuel via 𝛄Al2O3 and Ni/𝛄Al2O3 adsorbents and determination of their adsorption isotherms [Volume 10, Issue 3, 2017, Pages 51-64]
Abbasizadeh, Saeed Effects of Phosphorus on modification of HZSM-5 zeolite synthesized with different framework aluminum distribution in catalytic transformation of LPG to light olefins [Volume 11, Issue 4, 2019, Pages 101-117]
Abbaspour, Pouyan Numerical study of premixed hydrogen/air combustion characteristics in a converging - diverging micro tube [Volume 13, Issue 3, 2020, Pages 27-43]
Abbaspour, Pouyan Thermal Performance Analysis of a Swiss-roll Micro Combustion Chamber for Micro Thermophotovoltaic Applications [Volume 17, Issue 1, 2024, Pages 51-71]
Abbaszadeh, ahmad Modeling the effects of Carbon nanotubes added to diesel-biodiesel fuel blends on performance and emissions of a diesel engine using artificial neural network [Volume 10, Issue 2, 2017, Pages 1-16]
Abdi Aghdam, Ebrahim Experimental study of laminar burning velocity for dual fuel (Gasoline-NG)-Air mixture using pressure record in a spherical combustion bomb at higher primary pressure [Volume 11, Issue 1, 2018, Pages 121-134]
Abdi Aghdam, Ebrahim Effect of start timing of gasoline injection on cyclic variations,, HC and CO pollutants in part load of dual fuel gasoline-natural gas mode [Volume 15, Issue 1, 2022, Pages 71-85]
Abdi Aghdam, Ebrahim The effect of n-butanol and dimethyl carbonate additives as biodiesel fuel additives on diesel engine performance and emissions [Volume 15, Issue 4, 2022, Pages 83-107]
Abdollahi, Mohammad The Optimization of Surfactants Use to Produce Biodiesel-Diesel-Water Emulsion and Nano-Emulsion Fuels [Volume 10, Issue 1, 2017, Pages 1-12]
Abedi, Mohammad Ali Desulfurization of model diesel fuel via 𝛄Al2O3 and Ni/𝛄Al2O3 adsorbents and determination of their adsorption isotherms [Volume 10, Issue 3, 2017, Pages 51-64]
Abedi, Zahra Fire Risk Assessment of Diesel Fuel Storage Tanks in Mashhad Power Plants Using the Bow-Tie Technique and the Development of Appropriate Control and Mitigation Measures[Volume 19, Issue 2, 2026, Pages 1-19]
Abedinejad, Mohammad Sadegh Analysis of Influence of Variable Airflow Distribution on Reactive Flow in a Gas Turbine Model Combustion Chamber [Volume 8, Issue 2, 2015, Pages 13-32]
Abedinejad, Mohammad Sadegh Influence of Chemical Reaction Mechanisms on the Combustion Characteristics in a gas turbine model combustor [Volume 9, Issue 2, 2016, Pages 71-94]
A.Beige, Amir Numerical Investigation of Film Cooling in a Thruster [Volume 13, Issue 2, 2020, Pages 1-24]
Abroshan, Hamid Numerical Investigation of Burner Angles Effect on the Combustion Phenomenon in a Selected Power Plant Boiler [Volume 5, Issue 1, 2012, Pages 86-99]
Adeli, Ayob An Experimental Study of the Effects of Swirl and Air Dilution onNG Non-Premixed Flame Stability[Volume 3, Issue 1, 2010, Pages 21-34]
Adeli Kodehi, Ayoub Numerical simulation of combustion in a fired heater and providing a solution to reduce the flue gases temperature [Volume 16, Issue 3, 2023, Pages 85-94]
Adibi, Pouyan Impact of Diluent Flow Rate on Flame Stability and Pollutant Emission in Coaxial Non-Premixed Burner: A Large Eddy Simulation Study[Volume 19, Issue 2, 2026, Pages 20-38]
Afarin, Yashar Effect of Oxygen Mass Fraction and Reynolds Number on Methane-Hydrogen Flame in MILD Regime using LES Method[Volume 5, Issue 1, 2012, Pages 1-29]
Afrand, Masuod Investigation of the Effect of Chain Initiation on Direct Initiationof Detonation[Volume 1, Issue 2, 2008, Pages 1-12]
Afshar, homayoun Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Afshari, Asghar Large eddy simulations of fuel-air mixing in a trapped vortex combustor-effect of cavity length to depth ratio [Volume 11, Issue 4, 2019, Pages 43-63]
Aghaei, Erfan Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]
Aghaei, Erfan Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
Aghaeinejad-Meybodi, Abbas Separation of quinoline nitrogen compound from model fuel using Fe3O4/TiO2/UiO-66 composite [Volume 16, Issue 2, 2023, Pages 53-72]
Aghaie, B. Three dimensional simulation of the pulverized coal combustion inside tuyere of the blast furnace in Isfahan Steel [Volume 11, Issue 1, 2018, Pages 1-27]
Aghayari, majid Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Aghayari, Majid Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Aghayari, Majid Experimentally investigation of flame temperature distribution inside a can type combustor [Volume 11, Issue 2, 2018, Pages 51-67]
Aghbashlo, Mortaza Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Aghbashlo, Mortaza Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Ahmadi, Ghazaleh Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Ahmadian behrooz, Hesam Simulation and optimization of the biodiesel production process from waste cooking oil under different kinetic conditions [Volume 11, Issue 4, 2019, Pages 65-83]
Ahmadi Tonekaboni, Amirreza Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
Ajabshirchi, Yahya Exergy Analysis of a Diesel Engine using Multi-zone Combustion Model [Volume 6, Issue 1, 2013, Pages 49-63]
Ajamein, Hossein Hybrid Microwave-Combustion Synthesis of CuO/ZnO/Al2O3 Nanocatalyst Using Various Oxygen Contents for Hydrogen Production from Methanol [Volume 15, Issue 1, 2022, Pages 123-143]
Ajami, Nima Numerical investigation of adding hydrogen to natural gas in a gas engine on the performance characteristics of the engine [Volume 16, Issue 4, 2023, Pages 81-99]
Akbari, Mohammad Javad Determination of radial distribution of flame temperature and flame velocity by the thermocouple [Volume 11, Issue 4, 2019, Pages 85-100]
Akbari Seneh, Rojiar Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Akbarpour Ghiasi, Reza Exergy Analysis of a Diesel Engine using Multi-zone Combustion Model [Volume 6, Issue 1, 2013, Pages 49-63]
Akhlaghian, Faranak Production of Green Fuel Biodiesel from Sunflower Oil Using K2O Nanoparticles Sonochemically Immobilized over Bentonite [Volume 13, Issue 2, 2020, Pages 89-101]
Akhtardanesh, Mohammad Ali The Effect of Hydrogen Addition on the Acoustic Response of a Partially Premixed Counterflow Flame [Volume 16, Issue 4, 2023, Pages 43-60]
Akhtardanesh, Mohammad Ali Application of Machine Learning to Bring Efficiency to Costly Experiments: Case of Flame-Extinction [Volume 17, Issue 2, 2024, Pages 20-36]
Alamdari, Amin Statistical optimization using central composite design for the oxidative dehydrogenation process of LPG fuel on Fe / HZSM-5 in the presence of external electric field [Volume 10, Issue 2, 2017, Pages 93-112]
Alamdari, Amin Modeling of hydrogen production in catalytic membrane reactor through Ru-based catalysts with MgO and Nb2O5 as supports [Volume 15, Issue 3, 2022, Pages 100-119]
Alamdari, Amin Separation of quinoline nitrogen compound from model fuel using Fe3O4/TiO2/UiO-66 composite [Volume 16, Issue 2, 2023, Pages 53-72]
Ale Ebrahim, habib Removal of sulfur dioxide pollutant from combustion gases through catalytic reaction and conversion that to sulfur [Volume 11, Issue 3, 2018, Pages 79-92]
Alemi, Ehsan کاهش تولید اکسید نیتروژن در محفظه احتراق با استفاده از جتهای پایدار کننده [Volume 8, Issue 1, 2015, Pages 45-58]
Alipoor, Alireza Improvement of combustion characteristics for hydrogen-air mixture using modular structure in a novel micro combustor [Volume 12, Issue 4, 2019, Pages 1-13]
Alipoor, Alireza Numerical study of premixed hydrogen/air combustion characteristics in a converging - diverging micro tube [Volume 13, Issue 3, 2020, Pages 27-43]
Alipoor, Alireza Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Alipoor, Alireza Investigating the effects of molecular diffusion and hydrogen-enrichment on methane-air stratified swirl flame [Volume 15, Issue 2, 2022, Pages 57-74]
Alipoor, Alireza Thermal Performance Analysis of a Swiss-roll Micro Combustion Chamber for Micro Thermophotovoltaic Applications [Volume 17, Issue 1, 2024, Pages 51-71]
Alipoor, Alireza Numerical Investigation of Modular Structures in a U-Shaped Micro-Combustor on Combustion Characteristics of Hydrogen-Air Premixed Mixtures for Micro thermophotovoltaic Applications [Volume 17, Issue 4, 2024, Pages 45-72]
Alipour, Ensieh Application of Machine Learning to Bring Efficiency to Costly Experiments: Case of Flame-Extinction [Volume 17, Issue 2, 2024, Pages 20-36]
Alireza, َAlipoor The Numerical Investigation of Physical and Geometrical Conditions of Combustor and Mixture on Flame Stability in Micro Burner and Their Effects on Radiation Efficiency [Volume 9, Issue 1, 2016, Pages 59-74]
Alizadeh kaklar, Zahra Numerical study of the 3D internal flow field of effervescent atomizer at different aeration levels [Volume 13, Issue 4, 2020, Pages 25-42]
Alizadeh kaklar, Zahra Study of the instability of the annular liquid sheet exiting from the effervescent atomizer at high aeration ratios [Volume 15, Issue 1, 2022, Pages 86-101]
Allami, HHassanian Abdulrahman Karim Modeling and Assessment the Effective Parameters of Biodiesel Production from Date Seed Oil via Conventional, Microwave and Ultrasonic methods [Volume 11, Issue 3, 2018, Pages 29-46]
Almasi, Sara Optimization of biolubricant production process from biodiesel of Non-edible rapeseed using response surface method (RSM) [Volume 11, Issue 3, 2018, Pages 1-18]
Almasi, Sara Optimasiton of biodiesel production process from Non-edible rapseed using response surface method (RSM) [Volume 11, Issue 4, 2019, Pages 1-13]
Amani, Ehsan A Comparative Study of Premixed Turbulent Combustion with PDF and RANS Methods[Volume 3, Issue 1, 2010, Pages 35-47]
Ameri Mahabadi, Hossein Prediction and Optimization of Palm Biodiesel Characteristics Using Permittivity Properties and Response Surface Methodology [Volume 11, Issue 4, 2019, Pages 15-27]
Ameri Mahabadi, Hossein Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]
Amini, Elham Predicting of Physical Properties and Atomization Characteristics of the Biofuel Derived from Chlamydomoinas Microalga [Volume 3, Issue 2, 2010, Pages 47-58]
Aminian, Javad Implementation and economic analysis of MILD combustion in a
lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
Amiri, Hamed Numerical simulation of fuel-air mixture ignition in a v-type spark ignition engine and improvement of spark plug placement [Volume 15, Issue 2, 2022, Pages 1-24]
Amiri, Hossein Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]
Ansari, Mohammad Reza Numerical study of the 3D internal flow field of effervescent atomizer at different aeration levels [Volume 13, Issue 4, 2020, Pages 25-42]
Ansari, Mohammad Reza Study of the instability of the annular liquid sheet exiting from the effervescent atomizer at high aeration ratios [Volume 15, Issue 1, 2022, Pages 86-101]
Arab-Ameri, Ramin Evaluation of performance and emissions of dual fuel diesel engine in the presence of biodiesel and photocatalytic nanoparticles from the point of view of economic cycle evaluation method [Volume 17, Issue 4, 2024, Pages 73-92]
Arab Nejad, Mohammad Hadi Prediction of Burning Rate for Pyrotechnic Mixtures of Magnesium and Sodium Nitrate[Volume 4, Issue 2, 2011, Pages 91-102]
Arefmanesh, Ali Numerical investigation of the effect of geometric parameter of porosity in the burner of ammonia-methane porous media [Volume 17, Issue 2, 2024, Pages 96-118]
Arghavanifar, Mohammad Effect of temperature and pressure on oil coke production from refinery tailings [Volume 17, Issue 4, 2024, Pages 15-25]
Asadi, Ali Numerical Study on Counterflow Diffusion Flames of Natural Gas with CO2 Dilution [Volume 4, Issue 2, 2011, Pages 17-28]
Asadi, Ali Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Asadifard, Ali Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Asgharzadeh Karamshahlu, Alireza Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Ashini, hossein Influence of Inlet Temperature and Pressure in Transcritical and Supercritical Laminar Counter-Flow Flame of Liquid Oxygen/ Gaseous Methane [Volume 12, Issue 1, 2019, Pages 77-96]
Ashini, hossein Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Ashini, Hossein Experimental study of Ammonia-Methane mixture combustion in the micro gas turbine combustor [Volume 15, Issue 3, 2022, Pages 120-138]
Ashini, Hossein Experimental Study of Biogas Combustion in a Microturbine Combustion Chamber at Various CO2/NG Ratios [Volume 16, Issue 2, 2023, Pages 92-108]
Ashini, Hossein Experimental Study of Performance Parameters and Emissions of Microturbine Combustion Chamber Fueled by Synthetic Gas [Volume 17, Issue 3, 2024, Pages 19-37]
Ashouri, Ali Experimental Investigation of Flame Stability and Examination of Performance Map in a Structural Ceramic Porous Burner in Cooking Application [Volume 16, Issue 4, 2023, Pages 1-15]
Ashouri, Ali Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
Askari, Mahsa Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]
Asrardel, Mohamad Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Ataie, Majid Effect of start timing of gasoline injection on cyclic variations,, HC and CO pollutants in part load of dual fuel gasoline-natural gas mode [Volume 15, Issue 1, 2022, Pages 71-85]
Atarzadeh, Mohammadamin Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
Atayizadeh, Hassan Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2022, Pages 124-145]
Atoof, Hossein An Experimental Study of the Effect of Thickness and Porosity on the Performance of a Porous Metal Radiation Burner [Volume 2, Issue 2, 2009, Pages 11-23]
Atoof, Hossein An Experimental Study of Flashback Phenomenon in a Two-Layer Porous Media[Volume 5, Issue 1, 2012, Pages 31-42]
Atoof, Hossein Submerged Flame in Porous Media: A Numerical Study by Using FGM [Volume 10, Issue 3, 2017, Pages 79-92]
Ayoman, Esmaeil Preparation of energetic Al/CuO/RDX nanocomposite with enhanced reactivity [Volume 17, Issue 1, 2024, Pages 87-97]
Ayoman, Esmaeil Detonation performance of RDX+Al+Zn0.5Co0.5Fe2O4 nanocomposite predicted from reactive molecular dynamics simulations [Volume 17, Issue 3, 2024, Pages 38-49]
Azimi, AmirHossein Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Azimi Hosseini, Seyedeh Shabnam Functional Analysis of Combustion Products in Heating Systems Assisted by Non-Thermal Plasma Technology: An Experimental Study [Volume 19, Issue 1, 2026, Pages 56-77]
B
Babaee, Seyed Alireza Functional Analysis of Combustion Products in Heating Systems Assisted by Non-Thermal Plasma Technology: An Experimental Study [Volume 19, Issue 1, 2026, Pages 56-77]
Babaei, Farzam Fire Risk Assessment of Diesel Fuel Storage Tanks in Mashhad Power Plants Using the Bow-Tie Technique and the Development of Appropriate Control and Mitigation Measures[Volume 19, Issue 2, 2026, Pages 1-19]
Babaei, Hadi Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Babazadeh, Hossein Experimental Investigating the mutual effects of bioethanol, acetone and n-butanol as gasoline fuel additives on the performance and emissions of a spark ignition engine [Volume 16, Issue 3, 2023, Pages 1-20]
Baghaee, Mahdi Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Bagheri, Yousef Development of a Simple Model to Predict Cross Ignition Probability in Annular Combustors Equipped with EV Burners [Volume 11, Issue 2, 2018, Pages 1-12]
Bagherpour, Hossein Effect of the Blends of Diesel and Biodiesel Made From Waste Cooking Oil on Compression-Ignition Engine (CI) Performance[Volume 1, Issue 1, 2008, Pages 53-59]
Bahadori, Hosseini Numerical Study of Soot Formation of Pre-vaporized Heavy Hydrocarbon Combustion in a Diffusion Flame [Volume 17, Issue 2, 2024, Pages 1-19]
Bahri, Bahram Investigating combustion and emissions parameters in an ethanol fuelled low temperature combustion engine [Volume 11, Issue 3, 2018, Pages 65-77]
Baig Mohammadi, Mohammad Reza Numerical Simulation of the Effective Parameters on the Stability of Stoichiometric CH4/Air Premixed Combustion in a Micro-combustion Chamber[Volume 3, Issue 2, 2010, Pages 31-45]
Bakhshan, Younes Impact of Diluent Flow Rate on Flame Stability and Pollutant Emission in Coaxial Non-Premixed Burner: A Large Eddy Simulation Study[Volume 19, Issue 2, 2026, Pages 20-38]
BalZade, MohammadMahdi Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Barani, Ehsan Numerical Modeling of Mixing and Combustion at Supercritical Conditions for a Model Combustor [Volume 9, Issue 2, 2016, Pages 95-120]
Barkhordari, Ali Reza Numerical Simulation of the Cellular Structure of a Weakly Unstable Detonation Wave using PPM Method and Riemann Exact Solver[Volume 4, Issue 2, 2011, Pages 43-66]
Barzegar, Ramin A Numerical Investigation of the Effects of Creating an Air-Cell and Insulating the Piston on Combustion Process and Emission Formationin DI Diesel Engines[Volume 3, Issue 2, 2010, Pages 17-30]
Bashirnezhad, Kazem Lab Measurement of the Effect of Different Parameters onCarbon Black Yield[Volume 2, Issue 1, 2009, Pages 69-80]
Bastani, Milad Experimental study of Ammonia-Methane mixture combustion in the micro gas turbine combustor [Volume 15, Issue 3, 2022, Pages 120-138]
Bastani, Milad Experimental Study of Biogas Combustion in a Microturbine Combustion Chamber at Various CO2/NG Ratios [Volume 16, Issue 2, 2023, Pages 92-108]
Bastani, Milad Experimental Study of Performance Parameters and Emissions of Microturbine Combustion Chamber Fueled by Synthetic Gas [Volume 17, Issue 3, 2024, Pages 19-37]
Bastani, Milad Design, fabrication and evaluation of microturbine based on turbocharger with power generation purpose [Volume 19, Issue 1, 2026, Pages 133-156]
Bayramlou, Behzad An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
Bazazzadeh, Mehrdad Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
Bazdidi Tehrani, Farzad Influence of Thermal Radiation Models on Prediction of Reactive Swirling Methane/Air Flame in a Model Gas Turbine Combustor[Volume 1, Issue 2, 2008, Pages 1-15]
Bazdidi-Tehrani, Farzad Analysis of Influence of Variable Airflow Distribution on Reactive Flow in a Gas Turbine Model Combustion Chamber [Volume 8, Issue 2, 2015, Pages 13-32]
Bazdidi-Tehrani, Farzad Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
Bazdid tehrani, Farzad Influence of Chemical Reaction Mechanisms on the Combustion Characteristics in a gas turbine model combustor [Volume 9, Issue 2, 2016, Pages 71-94]
Behzad, Ehsan Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2022, Pages 37-60]
Besharati, Shahin An Experimental Comparison of Spark Ignition Engine with Gasolineand Natural Gas Fuels[Volume 3, Issue 1, 2010, Pages 75-85]
Boroomand, Masud A Numerical Investigation of Combustion and Injection in a DISI CNG Engine [Volume 6, Issue 1, 2013, Pages 33-48]
C
Carlucci, Antonio Paolo Experimental investigation of the effects of the high cetane number fuel injection on the performance of a direct injection low-temperature combustion engine [Volume 15, Issue 3, 2022, Pages 20-49]
Chahartaghi, Mahmood Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
D
Davazdahemami, Mohsen A Comparison of Cold Sprays of DIPA (Diesel-IsoPropyl Alcohol blended fuel) and Pure Diesel Using Numerical Simulation[Volume 1, Issue 1, 2008, Pages 19-31]
Davazdah Emami, Mohsen An Experimental Study of Flashback Phenomenon in a Two-Layer Porous Media[Volume 5, Issue 1, 2012, Pages 31-42]
Davazdah Emami, Mohsen An experimental study of stable combustion and flashback phenomenon in a double-layer porous burner [Volume 10, Issue 1, 2017, Pages 13-24]
Davazdah Emami, Mohsen Submerged Flame in Porous Media: A Numerical Study by Using FGM [Volume 10, Issue 3, 2017, Pages 79-92]
Davazdah Emami, Mohsen Investigation of Injection Angle Influence on an Air/Fuel Premixer Performance Using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 65-76]
Dianati tilaki, ramazan ali Carbon Dioxide Removal and Biomass Production from Methane Combustion in the Photobioreactor using Microalgae Spirulina [Volume 10, Issue 1, 2017, Pages 47-58]
Ebrahimi, Rahim Prediction of auto-ignition delay in HCCI engine[Volume 1, Issue 1, 2008, Pages 41-51]
Ebrahimi, Rahim An Experimental Comparison of Spark Ignition Engine with Gasolineand Natural Gas Fuels[Volume 3, Issue 1, 2010, Pages 75-85]
Ebrahimi, Rahim A New Thermodynamic Model for Determination of Cylinder Volume Deformation and TDC Position[Volume 4, Issue 1, 2011, Pages 1-11]
Ebrahimi, Reza Evaluation of Various Knock Control Methods in a Spark Ignition Engine Fuelled with Natural Gas through a Three Zone Quasi-Dimensional [Volume 1, Issue 2, 2008, Pages 21-35]
Ebrahimi, Reza Numerical Study of Reacting Gas Flow Heat Transfer in Liquid Rocket Engine Thrust Chamber[Volume 4, Issue 2, 2011, Pages 1-15]
Ebrahimi, Reza Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2022, Pages 37-60]
Ebrahimi Fordoei, esmaeil Numerical simulation of the syngas flame structure under air-fuel, oxygen enriched, and oxy-fuel regimes with flameless combustion: the impacts of fuel composition, preheating temperature, and oxygen mole fraction [Volume 15, Issue 4, 2022, Pages 61-82]
Ebrahimi Fordoei, Esmaeil Numerical study of the effect of carbon dioxide injection on flame structure in flameless combustion regime [Volume 13, Issue 3, 2020, Pages 1-26]
Ebrahimi Fordoei, Esmaeil Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
Ebrahimi Fordoei, Esmaeil The effect of functional parameters includes thermal power, fuel to air ratio, and syngas composition on thermal conditions and flame structure under MILD and HTC regimes [Volume 17, Issue 2, 2024, Pages 76-95]
Ebrahimi Fordoei, Esmaeil Numerical study on the effect of inlet geometry on stability and thermal conditions in ammonia-methane combustion in a furnace with a non-premixed burner [Volume 19, Issue 1, 2026, Pages 24-55]
Ebrahimi Fordoei, اسماعیل study of NO emission in syngas flameless combustion: The effect of inlet temperature, oxygen concentration, syngas composition and strain rate parameters [Volume 17, Issue 3, 2024, Pages 50-77]
Ebrahiminejad, Mitra Synthesize of NiMo/F-Al2O3 Nanocatalyst using Fluorine-Modified Impregnation Method for Desulfurization of Hydrocarbon Fuels[Volume 5, Issue 2, 2012, Pages 46-57]
Eftekhari, Mohammadreza Numerical study of pool fire radiation hazards in large-scale petroleum derivatives storage tanks in windless condition [Volume 16, Issue 1, 2023, Pages 107-124]
Ehsani, Abbas Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Ehsaniderakhshan, Faezeh Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
Ehsani Derakhshan, Faeze Numerical Study of Chemical Kinetic and Radiation Model Effects on the Velocity and Temperature Fields in Natural Gas- Oxygen Combustion by Using of Steady Flamelet Model [Volume 11, Issue 1, 2018, Pages 29-48]
Eidi Attar Zade, Masoud Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
Eidi Attar Zade, Masoud Numerical simulation of industrial gas turbine combustion chamber using FGM method [(Articles in Press)]
EidiAttarZade, Masoud Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
EidiAttarZade, Masoud Numerically investigation of the effect of initial temperature on the ignition in a shear-less mixing layer [Volume 11, Issue 1, 2018, Pages 101-120]
EidiAttarZade, Masoud Experimentally investigation of flame temperature distribution inside a can type combustor [Volume 11, Issue 2, 2018, Pages 51-67]
EidiAttarZade, Masoud Investigation of injector dimension on the performance of combustion chamber of a bi-propelant thruster [Volume 13, Issue 4, 2020, Pages 63-78]
Eidi Attarzadeh, Masoud Studying the Effects of Temperature on Ignition of Methane-air Jet using LES Method [Volume 9, Issue 2, 2016, Pages 1-19]
Eidi Attarzadeh, Masoud Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
Eidy Attarzade, مسعود An Experimental Study of Spiral Effect on Deflagration to Detonation Transition[Volume 3, Issue 1, 2010, Pages 9-20]
Emami, Sobhan Transient modeling of a D-type boiler with natural circulation loop: a study on boiler performance during a step change in load [Volume 15, Issue 1, 2022, Pages 25-52]
Emami, Sobhan Numerical and experimental investigation of the performance of a high-efficiency domestic gas stove burner using the response surface methodology [Volume 16, Issue 1, 2023, Pages 16-39]
EMAMI, SOBHAN Numerical study of the dynamic behavior of premixed hydrogen-air flame in a 90-degree bend duct [Volume 11, Issue 2, 2018, Pages 13-30]
EMAMI, SOBHAN Numerical Study of the Effect of Moisture Content, Particle Diameter and Fuel Mass Loading on Combustion of Solid Fuel Derived from Refinery Oily-Sludge [Volume 12, Issue 1, 2019, Pages 31-49]
EMAMI, SOBHAN Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
Emami Barsari, Afshin Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Emami Koopaei, Sobhan Numerical Investigation of the Effects of Blockage Ratio and Obstruction Geometry on Flame Acceleration and Overpressure of Gas Explosion[Volume 5, Issue 2, 2012, Pages 1-24]
Ershadi, Ali Prediction of turbulent Prandtl number in the methane-air combustion using a second-order turbulent scalar flux model [Volume 12, Issue 2, 0, Pages 31-48]
Esfahanian, Vahid Investigation of the Soot and NO Emission Reduction Mechanism in DI Diesel Engines by Means of Split Injection Strategy[Volume 3, Issue 2, 2010, Pages 91-103]
Esfahanian, Vahid A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Eslami, fatemeh Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]
Eslami, Fatemeh Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Etelaat, Ali Numerical investigation of adding hydrogen to natural gas in a gas engine on the performance characteristics of the engine [Volume 16, Issue 4, 2023, Pages 81-99]
F
Fahim, Mohammad Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
Faizollahzadeh, SIna The effect of n-butanol and dimethyl carbonate additives as biodiesel fuel additives on diesel engine performance and emissions [Volume 15, Issue 4, 2022, Pages 83-107]
Faizollahzadeh Ardabil, Sina Effect of Fatty Acid Ethyl Esters in Biodiesel on Thermo-physical Properties [Volume 9, Issue 2, 2016, Pages 121-133]
Faizollahzadeh Ardabili, Sina The effect of ethanol as a biodiesel fuel additive on the performance and emissions of a dual-fuel diesel engine [Volume 15, Issue 3, 2022, Pages 139-164]
Faizollahzadeh Ardabili, Sina Experimental Investigating the mutual effects of bioethanol, acetone and n-butanol as gasoline fuel additives on the performance and emissions of a spark ignition engine [Volume 16, Issue 3, 2023, Pages 1-20]
Faizollahzadeh Ardabili, Sina Life cycle evaluation of the effect of methyl tert-butyl ether as an oxygen additive on spark ignition engine performance and emissions [Volume 16, Issue 4, 2023, Pages 28-42]
Falah Heravi, Daniyal Lab Measurement of the Effect of Different Parameters onCarbon Black Yield[Volume 2, Issue 1, 2009, Pages 69-80]
Fallahi, Davood Numerical Investigation of using Micro-Hole Injector on Characteristics of Diesel FuelSpray of High Speed Diesel Engine [Volume 8, Issue 2, 2015, Pages 85-101]
Farahvashi, Soulmaz Numerical Study of the Effect of Moisture Content, Particle Diameter and Fuel Mass Loading on Combustion of Solid Fuel Derived from Refinery Oily-Sludge [Volume 12, Issue 1, 2019, Pages 31-49]
Farajollahi, Hossein Investigation on post-combustion CO2 capture from NGCC power plant [Volume 12, Issue 2, 0, Pages 15-29]
Faramarzpour, Hosein The Numerical Investigation of Physical and Geometrical Conditions of Combustor and Mixture on Flame Stability in Micro Burner and Their Effects on Radiation Efficiency [Volume 9, Issue 1, 2016, Pages 59-74]
Farshchi, Mohammad An Experimental Study of Spiral Effect on Deflagration to Detonation Transition[Volume 3, Issue 1, 2010, Pages 9-20]
Farshchi, Mohammad V-Shaped and M-Shaped Premixed Flame Response to Acoustic Excitations [Volume 3, Issue 2, 2010, Pages 59-73]
Farshchi, Mohammad Study of Mass Fraction Oscillation Effects on the Laminar Diffusion Flame Structure[Volume 4, Issue 1, 2011, Pages 31-43]
Farshchi, Mohammad Numerical Simulation of the Cellular Structure of a Weakly Unstable Detonation Wave using PPM Method and Riemann Exact Solver[Volume 4, Issue 2, 2011, Pages 43-66]
Farshchi, Mohammad Stability Characteristics and NOx Emissions of Low Swirl Flames[Volume 5, Issue 2, 2012, Pages 59-75]
Farshchi, Mohammad Studying the Effects of Temperature on Ignition of Methane-air Jet using LES Method [Volume 9, Issue 2, 2016, Pages 1-19]
Farshchi, Mohammad Influence of Inlet Temperature and Pressure in Transcritical and Supercritical Laminar Counter-Flow Flame of Liquid Oxygen/ Gaseous Methane [Volume 12, Issue 1, 2019, Pages 77-96]
Farshchi, Mohammad Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
Farshchi, Mohammad Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Farshchi, Mohammad Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
Farshchi, Mohammad Numerical Investigation of Supercritical Mixing dynamics of the Coaxial Swirl Injectors [Volume 15, Issue 4, 2022, Pages 20-44]
Farshchi, Mohammad Numerical Study of Trans/Supercritical Jets Mixing of Bi-Shear Injectors Under Excitation [Volume 16, Issue 3, 2023, Pages 60-76]
Farshchi, Mohammad The Effect of Hydrogen Addition on the Acoustic Response of a Partially Premixed Counterflow Flame [Volume 16, Issue 4, 2023, Pages 43-60]
FarshiFasih, Hamidreza Gasification of a heavy fuel oil in an entrained flow gasifier [Volume 13, Issue 1, 2020, Pages 18-35]
Farzad, Abdolali Modeling and Assessment the Effective Parameters of Biodiesel Production from Date Seed Oil via Conventional, Microwave and Ultrasonic methods [Volume 11, Issue 3, 2018, Pages 29-46]
Fashamiha, Amirhossein Numerical simulation of turbulent premixed flames using strained flamelet model [Volume 16, Issue 1, 2023, Pages 125-141]
Fatehi far, Esmaeil A Comparison of two Different Configurations of Multi-Zone Combustion Model for Natural Gas/n-Heptane Blend in HCCI Combustion Engines[Volume 2, Issue 2, 2009, Pages 41-56]
Fathieh, Farhad Study of Mass Fraction Oscillation Effects on the Laminar Diffusion Flame Structure[Volume 4, Issue 1, 2011, Pages 31-43]
Fazlollahi-Ghomshi, alireza Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]
Fazlollahi-Ghomshi, alireza The effect of swirl intensity on the probability of successful ignition and kernel propagation in the Amirkabir double swirl burner. [Volume 15, Issue 4, 2022, Pages 129-158]
Fazlollahi-Ghomshi, Alireza Numerical Investigation of Reacting Flow in a Double-swirled Gas Turbine Model Combustor [Volume 9, Issue 2, 2016, Pages 39-58]
Feyzollahnejad, Mehdi Effect of the Blends of Diesel and Biodiesel Made From Waste Cooking Oil on Compression-Ignition Engine (CI) Performance[Volume 1, Issue 1, 2008, Pages 53-59]
Forooghifar, Aliasghar Comparison of EF7.TC Engine Performance in Two Modes of CNG Fuel and Petrol using Piston and Combustion Chamber Thermal Simulation[Volume 3, Issue 2, 2010, Pages 1-16]
G
Gandjalikhan Nassab, Seyed Abdolreza Gas Radiation Effect on Thermal Characteristics of Porous Radiant Burner [Volume 6, Issue 1, 2013, Pages 73-84]
Geymachi, Alireza Simulation of combustion process in MTI4.244 diesel engine, in order to investigate the possibility of power enhancement and pollutant reduction [Volume 8, Issue 1, 2015, Pages 93-110]
Ghadimi, Masuod Low Frequency Combustion Instability Analysis in LRE by Using Double Time Lag Theory[Volume 1, Issue 1, 2008, Pages 61-74]
Ghaebi, Hadi The effect of n-butanol and dimethyl carbonate additives as biodiesel fuel additives on diesel engine performance and emissions [Volume 15, Issue 4, 2022, Pages 83-107]
Ghaebi, Hadi Experimental Investigating the mutual effects of bioethanol, acetone and n-butanol as gasoline fuel additives on the performance and emissions of a spark ignition engine [Volume 16, Issue 3, 2023, Pages 1-20]
Ghafourian Morshed, Akbar Study of Mass Fraction Oscillation Effects on the Laminar Diffusion Flame Structure[Volume 4, Issue 1, 2011, Pages 31-43]
Ghahremani, Amirreza Introducing a novel spiral-channel combustion chamber and experimentally investigating the effect of nitrogen dilution on non-premixed micro methane-oxygen flame by spectroscopy method [Volume 15, Issue 3, 2022, Pages 73-99]
Ghaleghi, Hasan A Dynamic Analysis of Fuel Droplets Breakup and Modification of Taylor Analogy Breakup (TAB) with Respect to Density Ratio Effects [Volume 2, Issue 2, 2009, Pages 2-10]
Ghamari, Mahdi Investigation of accuracy and precision of k-ω and k-ε turbulence models in the furnace with the flameless combustion mode [Volume 17, Issue 3, 2024, Pages 1-18]
Ghanbari, Mohammad Evaluation of Various Knock Control Methods in a Spark Ignition Engine Fuelled with Natural Gas through a Three Zone Quasi-Dimensional [Volume 1, Issue 2, 2008, Pages 21-35]
Ghanbarian, Asrin Numerical simulation of combustion in a fired heater and providing a solution to reduce the flue gases temperature [Volume 16, Issue 3, 2023, Pages 85-94]
Gharehghani, Ayat Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
Gharehghani, Ayat Numerical investigation of the effect of using porous catalytic media on the emission of ammonia fuel in the mesoscale combustor [Volume 18, Issue 2, 2025, Pages 49-69]
Gharloghy, Javad Comparison of EF7.TC Engine Performance in Two Modes of CNG Fuel and Petrol using Piston and Combustion Chamber Thermal Simulation[Volume 3, Issue 2, 2010, Pages 1-16]
Ghasemi, Hojat Prediction of Burning Rate for Pyrotechnic Mixtures of Magnesium and Sodium Nitrate[Volume 4, Issue 2, 2011, Pages 91-102]
Ghasemi, Majid ThermodynamicPerformanceAnalysis ofaSolidOxideFuel Cell and Micro Gas Turbine HybridCycle inaCHP System[Volume 4, Issue 2, 2011, Pages 67-89]
Ghasemi, Majid Performance evaluation of IT-AP-SOFC ammonia fueled and validation using machine learning [Volume 17, Issue 4, 2024, Pages 26-44]
Ghasseim, Hojat Gasification of a heavy fuel oil in an entrained flow gasifier [Volume 13, Issue 1, 2020, Pages 18-35]
Ghasseim, Hojat Transient evaporation of a bi-component droplet at high temperature and pressure [Volume 13, Issue 3, 2020, Pages 81-99]
Ghavami, Kavan Production of Green Fuel Biodiesel from Sunflower Oil Using K2O Nanoparticles Sonochemically Immobilized over Bentonite [Volume 13, Issue 2, 2020, Pages 89-101]
Ghavami, Seyed Vahid A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Ghiyasi, Mehdi Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
Ghobadian, Barat An Experimental Investigation of a Diesel Engine Ignition Delay using Biodiesel and Diesel Fuels[Volume 2, Issue 1, 2009, Pages 55-69]
Ghobadian, Barat The Optimization of Surfactants Use to Produce Biodiesel-Diesel-Water Emulsion and Nano-Emulsion Fuels [Volume 10, Issue 1, 2017, Pages 1-12]
Ghobadian, Barat Modeling the effects of Carbon nanotubes added to diesel-biodiesel fuel blends on performance and emissions of a diesel engine using artificial neural network [Volume 10, Issue 2, 2017, Pages 1-16]
Ghobadian, Barat The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
Ghofrani, Iraj RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]
Gholipour Zanjani, Nooshin Effects of Important Parameters on Biodiesel Production using Heterogeneous Potassium Carbonate/Alumina Catalyst and Rapeseed Oil [Volume 10, Issue 2, 2017, Pages 17-27]
Ghorbanian, Kaveh An Experimental Study of Spiral Effect on Deflagration to Detonation Transition[Volume 3, Issue 1, 2010, Pages 9-20]
Gobadian, Barat Investigating the Exhaust Emissions of a Spark Ignition Engine Using Gasohol [Volume 1, Issue 1, 2008, Pages 33-40]
Godini, Hamid Reza Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
Golestani, Reza Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Goli, Seyed Amir Hosesein Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Gorke, Oliver Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
H
Habibi, Hasan Simulation of combustion process in MTI4.244 diesel engine, in order to investigate the possibility of power enhancement and pollutant reduction [Volume 8, Issue 1, 2015, Pages 93-110]
Habibi, Hessamedin Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]
Habibirad, Saeed Numerical simulation and experimental investigation of a premixed cylindrical burner with gas mixing system using in condensing boiler [Volume 12, Issue 4, 2019, Pages 33-50]
Habibnia, Ali Akbar Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Haghighi, Mohammad Synthesize of NiMo/F-Al2O3 Nanocatalyst using Fluorine-Modified Impregnation Method for Desulfurization of Hydrocarbon Fuels[Volume 5, Issue 2, 2012, Pages 46-57]
Haghighi, Mohammad Hybrid Microwave-Combustion Synthesis of CuO/ZnO/Al2O3 Nanocatalyst Using Various Oxygen Contents for Hydrogen Production from Methanol [Volume 15, Issue 1, 2022, Pages 123-143]
Haghighi, Mohammad Thermodynamic Equilibrium Investigation of Sustainable Dimethyl Ether Green Fuel Production from Syngas by Gibbs Free Energy Minimization [Volume 18, Issue 4, 2025, Pages 124-143]
Haghighi Khoshkhoo, Ramin Implementation and economic analysis of MILD combustion in a
lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
Haji Agha Alizade, Hossein Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Hajiahmad, Ali Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Hajiahmad, Ali Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Hajialigol, Najmeh Turbulent lean premixed flame responseto the imposed inlet oscillatingvelocity and effect of the equivalence ratio and inlet temperature on it [Volume 9, Issue 2, 2016, Pages 20-37]
Hajialigol, Najmeh Analysis of combustion noise by changing inlet velocity in lean turbulent premixed flame [Volume 15, Issue 4, 2022, Pages 108-130]
Hajialigol, Najmeh Numerical investigation of combustion noise in gas turbine combustor using hydrogen/ ethylene: machine learning optimization [Volume 16, Issue 3, 2023, Pages 40-59]
Hajialigol, Najmeh Experimental analysis of thermo-acoustic instabilities and interaction of oscillatory modes in lean premixed flames using image processing technique [Volume 17, Issue 4, 2024, Pages 1-14]
Hajialigol, Najmeh Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
Hajialigol, Najmeh Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Hajialimohammadi, Alireza Numerical and Experimental Investigation of the Transient Mixing Dynamics of Compressible Helium Impinging Jet Using Time-Resolved Schlieren Imaging and Computational Fluid Dynamics Simulation [Volume 19, Issue 1, 2026, Pages 78-106]
Hajialimohammadi, ALireza Numerical Investigation of using Micro-Hole Injector on Characteristics of Diesel FuelSpray of High Speed Diesel Engine [Volume 8, Issue 2, 2015, Pages 85-101]
Hajian, Davod Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Hajipouralamdari, Fatemeh Separation of quinoline nitrogen compound from model fuel using Fe3O4/TiO2/UiO-66 composite [Volume 16, Issue 2, 2023, Pages 53-72]
Hakimdavood, Masuod A Comparison of Cold Sprays of DIPA (Diesel-IsoPropyl Alcohol blended fuel) and Pure Diesel Using Numerical Simulation[Volume 1, Issue 1, 2008, Pages 19-31]
Hamedi, Mohammad Hosein ThermodynamicPerformanceAnalysis ofaSolidOxideFuel Cell and Micro Gas Turbine HybridCycle inaCHP System[Volume 4, Issue 2, 2011, Pages 67-89]
Hamzeh-Nava, Ghodratollah A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Hasanabadi, Arman Study of hydrogen-methane flame structure in Sydney swirl stabilized burner using volumetric combustion model [Volume 17, Issue 2, 2024, Pages 37-56]
Hashemi, Seyed abdolmahdi A Numerical Investigation with Experimental Test of Combined Porous-Free Flame Burner and Its Comparisonwith a Porous Burner[Volume 5, Issue 2, 2012, Pages 77-91]
Hashemi, Seyed Abdolmahdi Investigation of the Effect of Chain Initiation on Direct Initiationof Detonation[Volume 1, Issue 2, 2008, Pages 1-12]
Hashemi, Seyed Abdolmehdi Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
Hashemi, SeyedAbdolmehdi Numerical study on the effect of inlet geometry on stability and thermal conditions in ammonia-methane combustion in a furnace with a non-premixed burner [Volume 19, Issue 1, 2026, Pages 24-55]
Hashemi, Seyed Masoud Numerical simulation of fuel-air mixture ignition in a v-type spark ignition engine and improvement of spark plug placement [Volume 15, Issue 2, 2022, Pages 1-24]
Hashemi and, Seyed abdolmahdi An Experimental Study of the Effect of Thickness and Porosity on the Performance of a Porous Metal Radiation Burner [Volume 2, Issue 2, 2009, Pages 11-23]
Hashemi Beni, Mehdi Transient modeling of a D-type boiler with natural circulation loop: a study on boiler performance during a step change in load [Volume 15, Issue 1, 2022, Pages 25-52]
Hasheminejhad, Amir The effect of ethanol as a biodiesel fuel additive on the performance and emissions of a dual-fuel diesel engine [Volume 15, Issue 3, 2022, Pages 139-164]
Havasi, Morad Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
Heidarinejad, Ghasem Large Eddy Simulation of Fire-induced Flow behind a Combustible Vertical Wall [Volume 6, Issue 1, 2013, Pages 17-31]
Heidarinejad, Ghassem Accuracy of Sub-grid Models in Internal Fire Whirl Modeling by Large Eddy Simulation [Volume 13, Issue 2, 2020, Pages 41-56]
Heidarinejad, Ghassem Numerical simulations of evaporation rate and fuel temperature under the transient radiative heat flux in the case of pool fire [Volume 15, Issue 2, 2022, Pages 90-107]
Heidarinejad, Ghassem Numerical study of the effect of the water mist nozzle location on fire extinguishing system in shielded fire [Volume 15, Issue 4, 2022, Pages 1-19]
Heidarinejad, Ghassem Numerical study of pool fire radiation hazards in large-scale petroleum derivatives storage tanks in windless condition [Volume 16, Issue 1, 2023, Pages 107-124]
Heidarinejad, GHassem Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
Hejazi, Mohammad Amin Effect of Microalgae Biodiesel on Performance Parameters and Exhaust Emissions from IDI Diesel Engine[Volume 4, Issue 2, 2011, Pages 29-43]
Helmi, Hamed Impact of Diluent Flow Rate on Flame Stability and Pollutant Emission in Coaxial Non-Premixed Burner: A Large Eddy Simulation Study[Volume 19, Issue 2, 2026, Pages 20-38]
Heshmati, Navid Experimental study of the effects of low swirl injector blockage ratio on stability limits and combustion regimes of natural gas flame [Volume 13, Issue 3, 2020, Pages 63-79]
Heyhat, Mohammad Mahdi Experimental Investigation of Flame Stability and Examination of Performance Map in a Structural Ceramic Porous Burner in Cooking Application [Volume 16, Issue 4, 2023, Pages 1-15]
Heyhat, Mohammad Mahdi The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
Heyrani Nobari, Mohammad Reza A Comparative Study of Premixed Turbulent Combustion with PDF and RANS Methods[Volume 3, Issue 1, 2010, Pages 35-47]
Hoseinzadeh, Mastaneh A Numerical Investigation of the Effects of Creating an Air-Cell and Insulating the Piston on Combustion Process and Emission Formationin DI Diesel Engines[Volume 3, Issue 2, 2010, Pages 17-30]
Hossainpour, Siamak Investigation on post-combustion CO2 capture from NGCC power plant [Volume 12, Issue 2, 0, Pages 15-29]
Hossainpour, Siyamak Numerical and Experimental Investigation of Baffles Effect on Thermal Efficiency of Room Gas Heater[Volume 3, Issue 1, 2010, Pages 1-8]
Hossainpour, Siyamak Two-Dimensional Numerical Simulation of Combustion in Porous Burners using for Multi-Steps Kinetics Mechanisms[Volume 3, Issue 1, 2010, Pages 63-74]
Hosseini, ُSeyyed Hassan Modeling the effects of Carbon nanotubes added to diesel-biodiesel fuel blends on performance and emissions of a diesel engine using artificial neural network [Volume 10, Issue 2, 2017, Pages 1-16]
Hosseini, ُSeyyed Hassan Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Hosseini, Sonia Thermo-economic modeling and analysis of the combined cooling, heat and power systems (CCHP) based on a fuel cell and micro gas turbine [Volume 17, Issue 3, 2024, Pages 78-96]
Hosseini, Vahid RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]
Hosseini doost, Erfan Numerical Study of Soot Formation of Pre-vaporized Heavy Hydrocarbon Combustion in a Diffusion Flame [Volume 17, Issue 2, 2024, Pages 1-19]
Hosseini Tamrabad, seyed Naser Numerical investigation of the effect of sudden expansion of the solid fuel ramjet combustion chamber on the regression rate [Volume 16, Issue 1, 2023, Pages 83-106]
Hosseinkhani, Mohammad Javad The Effect of Hydrogen Addition on the Acoustic Response of a Partially Premixed Counterflow Flame [Volume 16, Issue 4, 2023, Pages 43-60]
I
Iranmanesh, masoud Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]
J
Jabraeili, Maryam Investigation of the Impact of SiO2_Al2O3 nano-composite to biodiesel-diesel fuel on performance and emission of a diesel engine [Volume 13, Issue 2, 2020, Pages 25-39]
Jafari, Bahram Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Jafari, Farshid Fuel Production through Thermo-Catalytic Cracking of Waste Tires Using HY, β and HZSM-5 zeolites [Volume 15, Issue 2, 2022, Pages 25-36]
Jafari, Hamed Investigating the effect of arrangements of air and fuel inlets on the performance of flameless combustion furnace [Volume 16, Issue 3, 2023, Pages 21-39]
Jafari, Mohammadhossein Effects of combustion model in predicting pool fire and fire plum behaviors using a large eddy simulation method [Volume 12, Issue 3, 0, Pages 87-105]
Jafarian, Karim Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Jafarmadar, Samad A Computational Study of the Effects of Combustion Chamber Geometries on Combustion Process and Emission in a DI Diesel Engine[Volume 1, Issue 1, 2008, Pages 9-24]
Jafarmadar, Samad A Numerical Investigation of the Effects of Creating an Air-Cell and Insulating the Piston on Combustion Process and Emission Formationin DI Diesel Engines[Volume 3, Issue 2, 2010, Pages 17-30]
Jafarmadar, Samad Exergy Analysis of a Diesel Engine using Multi-zone Combustion Model [Volume 6, Issue 1, 2013, Pages 49-63]
JafarMadar, Samad Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Jafarsalehi, Morteza Carbon Dioxide Removal and Biomass Production from Methane Combustion in the Photobioreactor using Microalgae Spirulina [Volume 10, Issue 1, 2017, Pages 47-58]
Jahandideh, Farbod Investigating combustion and emissions parameters in an ethanol fuelled low temperature combustion engine [Volume 11, Issue 3, 2018, Pages 65-77]
Jahanian, Omid Effects of Natural Gas Composition on the Performance of a Homogenous Charge Compression Ignition (HCCI) Engine[Volume 4, Issue 1, 2011, Pages 13-29]
Jahanian, Omid 3D Simulation Considering Detailed Chemical Kinetics for a Homogeneous Charge Compression Ignition Engine Fueled with Methane and Dimethyl Ether [Volume 8, Issue 1, 2015, Pages 77-91]
Jahanian, Omid The effect of adding DME to methane on HCCI combustion performance and emissions [Volume 10, Issue 3, 2017, Pages 65-77]
Jahanian, Omid Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]
Jahanian, Omid Numerical Study of the Effect of Adding Water with Different Temperatures to Low-Reactivity Fuel in a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 13, Issue 4, 2020, Pages 43-62]
Jahannama, Mohammad Reza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Jahromi, Mehdi Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
Jajafi, Gholam Hosein Investigating the Exhaust Emissions of a Spark Ignition Engine Using Gasohol [Volume 1, Issue 1, 2008, Pages 33-40]
Jalalipour, Milad Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Jalalvandi, vahid Numerical simulation of combustion in a fired heater and providing a solution to reduce the flue gases temperature [Volume 16, Issue 3, 2023, Pages 85-94]
Jalili, Fariba Performance evaluation of non-noble and Inexpensive metal substrates for oxygen production in alkaline electrolysis [Volume 11, Issue 2, 2018, Pages 79-89]
Jalilian, Sadaf Modification of Commercial Activated Carbon for Adsorptive Desulfurization of Dibenzothiophene from Model Fuel [Volume 16, Issue 3, 2023, Pages 77-84]
Jaliliantabar, Farzad Optimization of the EGR rate, biodiesel fuel ratio and engine working mode by RSM method [Volume 10, Issue 3, 2017, Pages 15-32]
Jaliliantabar, Farzad Investigation of EGR rate and biodiesel fuel effects on the combustion parameters, soot and NOx emission of a compression ignition [Volume 11, Issue 1, 2018, Pages 49-67]
Jalilimehr, Mohammad Investigating the effect of direct heating of natural gas on soot formation, flame temperature, luminosity and emissions: A Combined Experimental and Numerical Approach [Volume 11, Issue 1, 2018, Pages 83-99]
Jamali, Ali Akbar Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2022, Pages 61-84]
Jamali, Ali Akbar Numerical investigation of the effect of combustion and turbulence models in estimating the combustion characteristics of a fuel-rich propellant -case study: ramjet [Volume 15, Issue 2, 2022, Pages 108-135]
Jamali, Ali Akbar Numerical investigation of the effect of grain fuel composition in ramjet combustion chamber on ignition delay time and solid fuel regression rate [Volume 16, Issue 1, 2023, Pages 61-82]
Jamali, Ali Akbar Numerical investigation of the effect of sudden expansion of the solid fuel ramjet combustion chamber on the regression rate [Volume 16, Issue 1, 2023, Pages 83-106]
Jamali, Ali Akbar Numerical study of the effect of mass flow rate and ratio of fuel to oxidizer on thrust, specific impulse and chamber pressure of a hybrid rocket based on paraffin fuel combustion [Volume 17, Issue 3, 2024, Pages 97-122]
Jamali, Mostafa Numerical investigation of combustion noise in gas turbine combustor using hydrogen/ ethylene: machine learning optimization [Volume 16, Issue 3, 2023, Pages 40-59]
Janbarari, Reza Simulation and optimization of the biodiesel production process from waste cooking oil under different kinetic conditions [Volume 11, Issue 4, 2019, Pages 65-83]
Javadi, Seyed Mohammad Experimental Study of Natural Gas Temperature Effects on the Flame Luminosity and NO Emission in a 120 kW Boiler[Volume 4, Issue 1, 2011, Pages 87-95]
Javadi, Zahra Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Javadirad, Setayesh Numerical investigation of adding hydrogen to natural gas in a gas engine on the performance characteristics of the engine [Volume 16, Issue 4, 2023, Pages 81-99]
Javaheri, Ahmad A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Jazayeri, Ali Simulation of Combustion in a Direct Injection Engine with Porous Media[Volume 5, Issue 1, 2012, Pages 71-85]
Jazayeri, Seyed Ali Evaluation of Various Knock Control Methods in a Spark Ignition Engine Fuelled with Natural Gas through a Three Zone Quasi-Dimensional [Volume 1, Issue 2, 2008, Pages 21-35]
Jazayeri, Seyed Ali Effects of Natural Gas Composition on the Performance of a Homogenous Charge Compression Ignition (HCCI) Engine[Volume 4, Issue 1, 2011, Pages 13-29]
Jems, Farhad Numerical simulations of evaporation rate and fuel temperature under the transient radiative heat flux in the case of pool fire [Volume 15, Issue 2, 2022, Pages 90-107]
Jodat, Amin Experimental study of nebulized ethanol injection in radiative heat transfer and NOX pollutant of natural gas flame [Volume 16, Issue 4, 2023, Pages 16-27]
Jodat, Amin Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
K
Kakaee, Amir Hasan Comparison of EF7.TC Engine Performance in Two Modes of CNG Fuel and Petrol using Piston and Combustion Chamber Thermal Simulation[Volume 3, Issue 2, 2010, Pages 1-16]
Kakaee, Amir Hasan Development of an Autoignition Submodel for Knock Prediction inTurbocharged SI Engine[Volume 3, Issue 2, 2010, Pages 75-91]
Kalantari, Arash Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
Kalati Hesari, Soroosh Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
Kalbasi, Rasool Transient modeling of a D-type boiler with natural circulation loop: a study on boiler performance during a step change in load [Volume 15, Issue 1, 2022, Pages 25-52]
Kamali, Saeedeh Preparation and evaluation of hydrogen electrode based on nickel nanoparticles on the graphene in water electrolysis [Volume 11, Issue 3, 2018, Pages 19-28]
Kamali Gollo, Hosein Effect of start timing of gasoline injection on cyclic variations,, HC and CO pollutants in part load of dual fuel gasoline-natural gas mode [Volume 15, Issue 1, 2022, Pages 71-85]
Kameli, Ali Experimental study of nebulized ethanol injection in radiative heat transfer and NOX pollutant of natural gas flame [Volume 16, Issue 4, 2023, Pages 16-27]
Kankashvar, Benyamin Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Kankashvar, BENYAMIN Experimentally investigation of flame temperature distribution inside a can type combustor [Volume 11, Issue 2, 2018, Pages 51-67]
Karegar Amjad, Amir An Automatic Mechanism Reduction Process in Order to Model the Combustion in an HCCI Engine Fueled with Natural Gas and N-heptane [Volume 6, Issue 1, 2013, Pages 1-15]
Karimaei, Hadiseh Investigation of the Friction Effects on Instability of the One-Dimensional Gaseous Detonation Waves in the Mixtures with Low Activation Energy[Volume 4, Issue 1, 2011, Pages 56-72]
Karimi, Behrad Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Karimi, Behrad Design, fabrication and evaluation of microturbine based on turbocharger with power generation purpose [Volume 19, Issue 1, 2026, Pages 133-156]
Karimi, Hasan Numerical Study of Reacting Gas Flow Heat Transfer in Liquid Rocket Engine Thrust Chamber[Volume 4, Issue 2, 2011, Pages 1-15]
Karimi, Shadi Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
Karimi MazraeShahi, Hasan Gasification of a heavy fuel oil in an entrained flow gasifier [Volume 13, Issue 1, 2020, Pages 18-35]
Karimzadeh, Ramin Thermodynamic Modeling of Gasoline Production Process through Thermal Cracking of Heavy Hydrocarbons [Volume 10, Issue 1, 2017, Pages 75-85]
Karimzadeh, Ramin Statistical optimization using central composite design for the oxidative dehydrogenation process of LPG fuel on Fe / HZSM-5 in the presence of external electric field [Volume 10, Issue 2, 2017, Pages 93-112]
Karimzadeh, Ramin Desulfurization of model diesel fuel via 𝛄Al2O3 and Ni/𝛄Al2O3 adsorbents and determination of their adsorption isotherms [Volume 10, Issue 3, 2017, Pages 51-64]
Karimzadeh, Ramin Effects of Phosphorus on modification of HZSM-5 zeolite synthesized with different framework aluminum distribution in catalytic transformation of LPG to light olefins [Volume 11, Issue 4, 2019, Pages 101-117]
Karimzadeh, Ramin Investigation of the Effect of Boron Promoter on Structural Properties of NiMo Nanocatalyst supported on Red Mud synthesized by Impregnation Method for Hydrocracking and Hydrodesulfurization of Oil Cuts [Volume 12, Issue 1, 2019, Pages 97-117]
Karimzadeh, Ramin Synthesize of Zirconia-Promoted NiMo Nanocatalyst supported on red mud via impregnation method used in Hydrodesulfurization of oil cuts [Volume 12, Issue 2, 0, Pages 75-88]
Karimzadeh, Ramin Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]
Karimzadeh, Ramin Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]
Karimzadeh, Ramin Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
Karimzadeh, Ramin Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
Karimzadeh, Ramin Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
Karimzadeh, Ramin Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Karimzadeh, Ramin Synthesis and specification of template free ZSM-5/Beta composite catalyst and kinetic modeling for the methanol to gasoline (MTG) process [Volume 15, Issue 1, 2022, Pages 1-24]
Karimzadeh, Ramin Fuel Production through Thermo-Catalytic Cracking of Waste Tires Using HY, β and HZSM-5 zeolites [Volume 15, Issue 2, 2022, Pages 25-36]
Karimzadeh, Ramin Studying the Influence of Temperature and Residence Time on the Recovery of Oil Filter Components via Pyrolysis [Volume 16, Issue 2, 2023, Pages 31-53]
Karimzadeh, Ramin Modification of Commercial Activated Carbon for Adsorptive Desulfurization of Dibenzothiophene from Model Fuel [Volume 16, Issue 3, 2023, Pages 77-84]
Karimzadeh, Ramin Effect of temperature and pressure on oil coke production from refinery tailings [Volume 17, Issue 4, 2024, Pages 15-25]
Karimzadeh, Ramin Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Kashaniasl, Shahram Numerical and Experimental Investigation of Baffles Effect on Thermal Efficiency of Room Gas Heater[Volume 3, Issue 1, 2010, Pages 1-8]
Kashir, Babak An Experimental Study of Propane/Oxygen and City Gas/Oxygen Laminar Diffusion Flames in Ddiluted and Preheating Cconditions [Volume 1, Issue 1, 2008, Pages 1-17]
Kashir, Babak An Experimental Study of the Stability of City Gas and PropaneTurbulent Non-Premixed Flames under Diluting Conditions[Volume 2, Issue 1, 2009, Pages 1-14]
Kavand, Matin The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
Kazemi Seresht, Saeed liquid fuel distribution in the combustion chamber by jet impingement with small cylindrical obstacles [Volume 13, Issue 3, 2020, Pages 101-119]
Kazempoor, pezhman Modeling a Planar Solid Oxide Fuel Cell for Combined Heat andPower Systems[Volume 2, Issue 1, 2009, Pages 14-40]
Kebriaee, Azadeh An Experimental Study on the Operating Parameters of a Simplex Swirl Injector [Volume 9, Issue 1, 2016, Pages 75-84]
Kebriaee, Azadeh Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Kebriyaee, Seyed Ahmad Numerical study of the effect of ambient air temperature and relative humidity on diesel pool fire [Volume 17, Issue 2, 2024, Pages 57-76]
Keikha Moqaddam, Vahid Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Keshavarzi, Mohsen Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Keshtkar, Mohammad mehdi Gas Radiation Effect on Thermal Characteristics of Porous Radiant Burner [Volume 6, Issue 1, 2013, Pages 73-84]
Keyhanpour, Mahdi Performance evaluation of IT-AP-SOFC ammonia fueled and validation using machine learning [Volume 17, Issue 4, 2024, Pages 26-44]
Khabbaz, Seyed Alireza An Experimental Investigation of the Effect of Fuel Propertieson Combustion, Performance and Emission Characteristics ofa DI Diesel Engine[Volume 2, Issue 1, 2009, Pages 41-53]
Khabbazian, Ghasem Implementation and economic analysis of MILD combustion in a
lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
Khadem, Javad Numerical Study on Counterflow Diffusion Flames of Natural Gas with CO2 Dilution [Volume 4, Issue 2, 2011, Pages 17-28]
Khadem, Javad Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
Khadem, Javad Automatic reduction of detailed combustion mechanisms using particle swarm optimization, differential evolution and angular modulation algorithms: application to Dimethyl Ether/air combustion [Volume 15, Issue 1, 2022, Pages 102-122]
Khadem, Javad Experimental investigation of the effects of the high cetane number fuel injection on the performance of a direct injection low-temperature combustion engine [Volume 15, Issue 3, 2022, Pages 20-49]
Khadem, Javad Numerical investigation of performance parameters and emission of NOx pollutant of RCCI engine with methane-diesel fuel at different injection times and equivalence ratios [Volume 16, Issue 1, 2023, Pages 40-60]
Khadem, Javad Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Khalaghi, Mahya Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Khaledi, Hiwa Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Khaledian, Sirvan Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Khalilarya, Shahram A Numerical Investigation of the Effects of Creating an Air-Cell and Insulating the Piston on Combustion Process and Emission Formationin DI Diesel Engines[Volume 3, Issue 2, 2010, Pages 17-30]
Khanbabazadeh, Mojtaba A Computational Study of the Effects of Combustion Chamber Geometries on Combustion Process and Emission in a DI Diesel Engine[Volume 1, Issue 1, 2008, Pages 9-24]
Khani, Masoud Removal of sulfur dioxide pollutant from combustion gases through catalytic reaction and conversion that to sulfur [Volume 11, Issue 3, 2018, Pages 79-92]
Khani, Mohammad Study of the Effect of Ethyl Ester of Sunflower Oil and Its Different Mixtures with Diesel on Performance and Emission Parameters of a Turbocharged Direct Injection Diesel Engine [Volume 4, Issue 1, 2011, Pages 45-55]
Khataee, Alireza Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Khayat, Meghdad The effect of n-butanol and dimethyl carbonate additives as biodiesel fuel additives on diesel engine performance and emissions [Volume 15, Issue 4, 2022, Pages 83-107]
Kheradmand, Saeid A Comparison of Cold Sprays of DIPA (Diesel-IsoPropyl Alcohol blended fuel) and Pure Diesel Using Numerical Simulation[Volume 1, Issue 1, 2008, Pages 19-31]
Khodabakhshikoulaei, Azar The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
Khodaparast, Shahram PerformanceModeling and Analysis of Stirling Engine, Gas Turbine and Fuel Cell Hybrid Cycle for Application in a CHP System [Volume 8, Issue 2, 2015, Pages 103-123]
Khodaverdian, Roozbeh Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Khoshbakhti Saray, Rahim An Experimental Investigation of the Effect of Fuel Propertieson Combustion, Performance and Emission Characteristics ofa DI Diesel Engine[Volume 2, Issue 1, 2009, Pages 41-53]
Khoshbakhti Saray, Rahim An Experimental Investigation of a Diesel Engine Ignition Delay using Biodiesel and Diesel Fuels[Volume 2, Issue 1, 2009, Pages 55-69]
Khoshbakhti Saray, Rahim A Comparison of two Different Configurations of Multi-Zone Combustion Model for Natural Gas/n-Heptane Blend in HCCI Combustion Engines[Volume 2, Issue 2, 2009, Pages 41-56]
Khoshbakhti Saray, Rahim An Automatic Mechanism Reduction Process in Order to Model the Combustion in an HCCI Engine Fueled with Natural Gas and N-heptane [Volume 6, Issue 1, 2013, Pages 1-15]
Khoshbakhti Saray, Rahim Exergy Analysis of a Diesel Engine using Multi-zone Combustion Model [Volume 6, Issue 1, 2013, Pages 49-63]
Khoshbakhti Saray, Rahim Simulation of combustion process in MTI4.244 diesel engine, in order to investigate the possibility of power enhancement and pollutant reduction [Volume 8, Issue 1, 2015, Pages 93-110]
Khoshbakhti Saray, Rahim Investigating the Behavior of Natural Gas Flame in a Spark Ignition Engine [Volume 10, Issue 1, 2017, Pages 59-74]
Khoshbin, Reza Thermodynamic Modeling of Gasoline Production Process through Thermal Cracking of Heavy Hydrocarbons [Volume 10, Issue 1, 2017, Pages 75-85]
Khoshbin, Reza Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
Khoshbin, Reza Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
Khoshbin, Reza Synthesis and specification of template free ZSM-5/Beta composite catalyst and kinetic modeling for the methanol to gasoline (MTG) process [Volume 15, Issue 1, 2022, Pages 1-24]
Khoshbin, Reza Fuel Production through Thermo-Catalytic Cracking of Waste Tires Using HY, β and HZSM-5 zeolites [Volume 15, Issue 2, 2022, Pages 25-36]
Khoshbin, Reza Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
Khoshbin, Reza Thermodynamic Equilibrium Investigation of Sustainable Dimethyl Ether Green Fuel Production from Syngas by Gibbs Free Energy Minimization [Volume 18, Issue 4, 2025, Pages 124-143]
Khoshtaghaza, Mohammad Hadi Prediction and Optimization of Palm Biodiesel Characteristics Using Permittivity Properties and Response Surface Methodology [Volume 11, Issue 4, 2019, Pages 15-27]
Khoshtaghaza, Mohammad Hadi Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]
Khosousi, Ali Study of Mass Fraction Oscillation Effects on the Laminar Diffusion Flame Structure[Volume 4, Issue 1, 2011, Pages 31-43]
Khosraviyolhosseini, Mostafa A Numerical Investigation with Experimental Test of Combined Porous-Free Flame Burner and Its Comparisonwith a Porous Burner[Volume 5, Issue 2, 2012, Pages 77-91]
Kiani Deh Kiani, Mostafa Investigating the Exhaust Emissions of a Spark Ignition Engine Using Gasohol [Volume 1, Issue 1, 2008, Pages 33-40]
Kiani Deh Kiani, Mostafa Biogas production from sugar cane vinasse using a Static Granual Bed Reactor (SGBR) [Volume 11, Issue 2, 2018, Pages 69-78]
Kolahdooz, Habib Evaluation of performance and emissions of dual fuel diesel engine in the presence of biodiesel and photocatalytic nanoparticles from the point of view of economic cycle evaluation method [Volume 17, Issue 4, 2024, Pages 73-92]
Kolahdooz, Habib Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
Kouhestani, Fatemeh Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]
Kousheshi, Navid Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]
L
Latifi Poshtahani, Javad Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
M
Maerefat, Mehdi Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Maghsoodi, Amir The Experimental Investigation of Pollutants of NOX and CO in a Non-Premixed Pulse Combustor[Volume 4, Issue 2, 2011, Pages 91-101]
Mahdavi, Amir Hossein Evaluation of Unity Lewis Number Assumption in Modeling of Water and Fuel Droplets Evaporation [Volume 6, Issue 1, 2013, Pages 64-72]
Mahdavi Moghaddam, Hossein Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
Mahdavy-Moghaddam, Hossein Numerical simulation of asphalt water slurry gasification process in an entrained flow gasifier [Volume 12, Issue 1, 2019, Pages 13-30]
Mahdi, Miralam Numerical Analysis of the Effects of Needle Lift and Seat on the Cavitation Flow in the Diesel Injector Nozzle [Volume 8, Issue 2, 2015, Pages 55-70]
Mahian, Omid Experimental study of nebulized ethanol injection in radiative heat transfer and NOX pollutant of natural gas flame [Volume 16, Issue 4, 2023, Pages 16-27]
Mahmoodi, Mostafa The numerical simulation and analysis of a prototype scramjet (DLR) in reacting and non-reacting conditions [Volume 13, Issue 3, 2020, Pages 45-62]
Mahmoodi, Mostafa Three-dimensional modeling of the combustion process of a scramjet by considering multi-stage reaction mechanism [Volume 13, Issue 4, 2020, Pages 1-25]
Mahmoodi, Mostafa Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Mahmoodi Arya, Mohammad Experimental and Numerical Study of N2 Dilution on NOx Emission in Methane-Air Premixed Flames[Volume 3, Issue 1, 2010, Pages 49-61]
Mahmoudi, Yasser Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
Mahmoudi Rad, Mohammad Mehdi Kinetic Modeling and Route Analysis of Standard LNG Mixtures Combustion, based on Auto-ignition and Methane Content [Volume 19, Issue 1, 2026, Pages 1-23]
Majidi Parsa, Mohammad Numerical Study of Reacting Gas Flow Heat Transfer in Liquid Rocket Engine Thrust Chamber[Volume 4, Issue 2, 2011, Pages 1-15]
Malaek, Seyed Mohammad Bagher Application of Machine Learning to Bring Efficiency to Costly Experiments: Case of Flame-Extinction [Volume 17, Issue 2, 2024, Pages 20-36]
Mani, Mahmoud Studying the Effects of Temperature on Ignition of Methane-air Jet using LES Method [Volume 9, Issue 2, 2016, Pages 1-19]
Mani, Mahmoud Numerically investigation of the effect of initial temperature on the ignition in a shear-less mixing layer [Volume 11, Issue 1, 2018, Pages 101-120]
Mani, Mahmoud Experimental Study of Biogas Combustion in a Microturbine Combustion Chamber at Various CO2/NG Ratios [Volume 16, Issue 2, 2023, Pages 92-108]
Mardani, Amir An Experimental Study of Propane/Oxygen and City Gas/Oxygen Laminar Diffusion Flames in Ddiluted and Preheating Cconditions [Volume 1, Issue 1, 2008, Pages 1-17]
Mardani, Amir A Numerical Study of the Effect of Flow Dynamics and Oxygen Concentrationon Methane-Hydrogen Non-Premixed Flame in a Mild Combustion Regime[Volume 2, Issue 2, 2009, Pages 69-83]
Mardani, Amir Numerical Investigation of Reacting Flow in a Double-swirled Gas Turbine Model Combustor [Volume 9, Issue 2, 2016, Pages 39-58]
Mardani, Amir Numerical Modeling of Mixing and Combustion at Supercritical Conditions for a Model Combustor [Volume 9, Issue 2, 2016, Pages 95-120]
Mardani, Amir The effect of pre-heating and dilution level on the combustion field and flue gas composition of an oxy-MILD combustion system in a laboratory-scale furnace [Volume 12, Issue 3, 0, Pages 53-71]
Mardani, Amir Numerical Investigation of Film Cooling in a Thruster [Volume 13, Issue 2, 2020, Pages 1-24]
Mardani, Amir CH* Chemiluminescence Measurement in sooting Flames [Volume 15, Issue 2, 2022, Pages 75-89]
Mardani, Amir Investigating the effect of the plasma actuator on the degree of mixing in a burner with mild combustion conditions [Volume 17, Issue 1, 2024, Pages 1-18]
Masih Tehrani, Masoud A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Masumi, Hamid Numerical Investigation of Burner Angles Effect on the Combustion Phenomenon in a Selected Power Plant Boiler [Volume 5, Issue 1, 2012, Pages 86-99]
Mazaheri, Kiumars Large Scale Flame Acceleration Modeling by a New Combined Combustion Model[Volume 5, Issue 1, 2012, Pages 55-70]
Mazaheri, Kiumars Numerical Investigation of the Effects of Blockage Ratio and Obstruction Geometry on Flame Acceleration and Overpressure of Gas Explosion[Volume 5, Issue 2, 2012, Pages 1-24]
Mazaheri, Kiumars Large Eddy Simulation of Fire-induced Flow behind a Combustible Vertical Wall [Volume 6, Issue 1, 2013, Pages 17-31]
Mazaheri, Kiumars The Numerical Investigation of Physical and Geometrical Conditions of Combustor and Mixture on Flame Stability in Micro Burner and Their Effects on Radiation Efficiency [Volume 9, Issue 1, 2016, Pages 59-74]
Mazaheri, Kiumars Turbulent lean premixed flame responseto the imposed inlet oscillatingvelocity and effect of the equivalence ratio and inlet temperature on it [Volume 9, Issue 2, 2016, Pages 20-37]
Mazaheri, Kiumars Investigation of Swirl Number and Exhaust Gas Recirculation Impact in Numerical Simulation of Common Dual Fuel Power Plant Burner [Volume 10, Issue 1, 2017, Pages 25-45]
Mazaheri, Kiumars Numerical Study of Chemical Kinetic and Radiation Model Effects on the Velocity and Temperature Fields in Natural Gas- Oxygen Combustion by Using of Steady Flamelet Model [Volume 11, Issue 1, 2018, Pages 29-48]
Mazaheri, Kiumars Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
Mazaheri, Kiumars Numerical study of the effect of carbon dioxide injection on flame structure in flameless combustion regime [Volume 13, Issue 3, 2020, Pages 1-26]
Mazaheri, Kiumars Investigating the effects of molecular diffusion and hydrogen-enrichment on methane-air stratified swirl flame [Volume 15, Issue 2, 2022, Pages 57-74]
Meghdadi Isfahani, Amir Homayoon Transient modeling of a D-type boiler with natural circulation loop: a study on boiler performance during a step change in load [Volume 15, Issue 1, 2022, Pages 25-52]
Mehin Ghaffari Nia, Abdolreza Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Mehrbod Khomeyrani, Mojtaba Experimental study of laminar burning velocity for dual fuel (Gasoline-NG)-Air mixture using pressure record in a spherical combustion bomb at higher primary pressure [Volume 11, Issue 1, 2018, Pages 121-134]
Mehrpooya, Milad Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Mehrpooya, Milad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Mehryar, Reza Evaluation of Unity Lewis Number Assumption in Modeling of Water and Fuel Droplets Evaporation [Volume 6, Issue 1, 2013, Pages 64-72]
Mirahmadi, Seyed Ehsan Numerical and experimental investigation of the performance of a high-efficiency domestic gas stove burner using the response surface methodology [Volume 16, Issue 1, 2023, Pages 16-39]
Mirahmadi, Seyed Hamidreza Numerical and experimental investigation of the performance of a high-efficiency domestic gas stove burner using the response surface methodology [Volume 16, Issue 1, 2023, Pages 16-39]
Mirmohammadi, Ali Studying wall shear layer in ultrasonic cavity flow using numerical simulation [Volume 11, Issue 1, 2018, Pages 69-82]
Mirnajafi, Seyed Mohammad An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
Mirnajafizadeh, Seyed Mohammad Turbulence Modeling in a Lifted Diffusion Jet Flame Issuing into a Hot and Dilluted Coflow [Volume 6, Issue 1, 2013, Pages 85-101]
Mirsajedi, Seyyed Mehdi 3D simulation and study of biogas combustion in C30 microturbine annular combustion chamber [Volume 17, Issue 1, 2024, Pages 72-86]
Mirsalim, Seyed Mostafa Numerical Investigation of using Micro-Hole Injector on Characteristics of Diesel FuelSpray of High Speed Diesel Engine [Volume 8, Issue 2, 2015, Pages 85-101]
Mirsalim, Seyyed Mostafa Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Mirshafiee, Faezeh Synthesis and specification of template free ZSM-5/Beta composite catalyst and kinetic modeling for the methanol to gasoline (MTG) process [Volume 15, Issue 1, 2022, Pages 1-24]
Mirvakili, Azadeh Investigation the effect of emissivity coefficient changing and ceramic coating utilization on the synthesis gas production of steam methane reformer [Volume 17, Issue 4, 2024, Pages 93-112]
Mirvakili, Azadeh Investigation of the effect of using unit waste gases as a fuel in a methane reformer furnace on syngas production [Volume 18, Issue 3, 2025, Pages 90-107]
Mirzadeh, Mohammad Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Mirzaee, Sajad Influence of Chemical Reaction Mechanisms on the Combustion Characteristics in a gas turbine model combustor [Volume 9, Issue 2, 2016, Pages 71-94]
Moallemi Khiavi, Negin Two-Dimensional Numerical Simulation of Combustion in Porous Burners using for Multi-Steps Kinetics Mechanisms[Volume 3, Issue 1, 2010, Pages 63-74]
Mobasheri, Raouf Applying the Homogeneity Factor to Evaluate the Effects of Pilot Injection Characteristics on Air-Fuel Mixing Quality and Engine Performance in a Turbo-Charged High Speed Direct Injection (HSDI) Diesel Engine [Volume 10, Issue 2, 2017, Pages 53-71]
Moghadasi, Mohamad Hassan The effect of pre-heating and dilution level on the combustion field and flue gas composition of an oxy-MILD combustion system in a laboratory-scale furnace [Volume 12, Issue 3, 0, Pages 53-71]
Moghiman, Mohammad On a Numerical Model for Gasification of Biomass Materials: An Alternative Method to Combustion [Volume 1, Issue 1, 2008, Pages 1-8]
Moghiman, Mohammad Lab Measurement of the Effect of Different Parameters onCarbon Black Yield[Volume 2, Issue 1, 2009, Pages 69-80]
Moghiman, Mohammad Experimental Study of Natural Gas Temperature Effects on the Flame Luminosity and NO Emission in a 120 kW Boiler[Volume 4, Issue 1, 2011, Pages 87-95]
Moghiman, Mohammad Investigating the effect of direct heating of natural gas on soot formation, flame temperature, luminosity and emissions: A Combined Experimental and Numerical Approach [Volume 11, Issue 1, 2018, Pages 83-99]
Moghiman, Mohammad Numerical study of the effect of ambient air temperature and relative humidity on diesel pool fire [Volume 17, Issue 2, 2024, Pages 57-76]
Mohammadbagheri, Saeed Experimental Investigation of Flame Stability and Examination of Performance Map in a Structural Ceramic Porous Burner in Cooking Application [Volume 16, Issue 4, 2023, Pages 1-15]
Mohammadi, Arash Simulation of Combustion in a Direct Injection Engine with Porous Media[Volume 5, Issue 1, 2012, Pages 71-85]
Mohammadi, Hamed Numerical Investigation of Modular Structures in a U-Shaped Micro-Combustor on Combustion Characteristics of Hydrogen-Air Premixed Mixtures for Micro thermophotovoltaic Applications [Volume 17, Issue 4, 2024, Pages 45-72]
Mohammadi, Jalal Numerical modeling and parametric analysis of the geometrical factors of combustion chamber in a solid fuel ramjet engine [Volume 17, Issue 1, 2024, Pages 19-50]
Mohammadi, Pouya Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Mohammadi, Rafat The Effects of Gas Flow in Anode Channel and Within Anode Electrode on Electrochemical Impedance of Solid Oxide Fuel Cell [Volume 9, Issue 1, 2016, Pages 39-58]
Mohammadi, Vahid An Automatic Mechanism Reduction Process in Order to Model the Combustion in an HCCI Engine Fueled with Natural Gas and N-heptane [Volume 6, Issue 1, 2013, Pages 1-15]
Mohammadian Esfahani, Ehsan Investigation of Swirl Number and Exhaust Gas Recirculation Impact in Numerical Simulation of Common Dual Fuel Power Plant Burner [Volume 10, Issue 1, 2017, Pages 25-45]
Mohammadpour, Amirreza Investigating the effects of molecular diffusion and hydrogen-enrichment on methane-air stratified swirl flame [Volume 15, Issue 2, 2022, Pages 57-74]
Mohebbi, Arash Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Mohebbi, Mostafa RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]
Mohsenirad, Mohsen Numerical investigation of adding hydrogen to natural gas in a gas engine on the performance characteristics of the engine [Volume 16, Issue 4, 2023, Pages 81-99]
Mollahassanzadeh, Ehsan Prediction of NOx Emissions in an Industrial Gas Turbine Combustor Using Large Eddy Simulation and Reactor Network Modeling [Volume 11, Issue 2, 2018, Pages 91-117]
Momahedi Heravi, Hamid Lab Measurement of the Effect of Different Parameters onCarbon Black Yield[Volume 2, Issue 1, 2009, Pages 69-80]
Momahedi Heravi, Hamid Experimental and Numerical Study of N2 Dilution on NOx Emission in Methane-Air Premixed Flames[Volume 3, Issue 1, 2010, Pages 49-61]
Momahedi Heravi, Hamid The Experimental Investigation of Pollutants of NOX and CO in a Non-Premixed Pulse Combustor[Volume 4, Issue 2, 2011, Pages 91-101]
Momahedi Heravi, Hamid An Experimental Investigation of NOx and CO Emissions in a Non-Premixed Pulse Combustor[Volume 5, Issue 1, 2012, Pages 43-53]
Montazerinejad, Sara CO pollutant Prediction of a Stationary Gas Turbine Combustor Using Finite Rate Eddy Dissipation Combustion Model [Volume 10, Issue 3, 2017, Pages 33-49]
Montazerinejad, Sara Prediction of NOx Emissions in an Industrial Gas Turbine Combustor Using Large Eddy Simulation and Reactor Network Modeling [Volume 11, Issue 2, 2018, Pages 91-117]
Moosavi, Elham Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Morad, Mohammad Reza Experimental study of liquid film thickness formed by spray impingement on a solid surface [Volume 13, Issue 2, 2020, Pages 57-72]
Morad, Mohammad Reza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Moradi, Gholamreza Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Moridi, Samira Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil [Volume 13, Issue 1, 2020, Pages 50-66]
Mosallanejad, Ahmad Numerical study of the dynamic behavior of premixed hydrogen-air flame in a 90-degree bend duct [Volume 11, Issue 2, 2018, Pages 13-30]
Moshir, Ghasem Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
Mostofizadeh, AliReza Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
Motevali, Ali Investigation of environmental impact of bioethanol production from potato waste [Volume 13, Issue 1, 2020, Pages 36-49]
Mousavi, Ali Sustainable power generation from a dual fuel diesel engine in the presence of biodiesel, bioethanol and biogas: evaluation using the life cycle method [Volume 16, Issue 2, 2023, Pages 1-30]
Mousavi, Mohsen Automatic reduction of detailed combustion mechanisms using particle swarm optimization, differential evolution and angular modulation algorithms: application to Dimethyl Ether/air combustion [Volume 15, Issue 1, 2022, Pages 102-122]
Mousavi, Seyyed Ebrahim Removal of sulfur dioxide pollutant from combustion gases through catalytic reaction and conversion that to sulfur [Volume 11, Issue 3, 2018, Pages 79-92]
Mousavi, Seyyedeh Fateme Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Movahedi, Alireza Carbon Dioxide Removal and Biomass Production from Methane Combustion in the Photobioreactor using Microalgae Spirulina [Volume 10, Issue 1, 2017, Pages 47-58]
Mozaffari, Abbas Removal of sulfur dioxide pollutant from combustion gases through catalytic reaction and conversion that to sulfur [Volume 11, Issue 3, 2018, Pages 79-92]
Nabatian, Negar V-Shaped and M-Shaped Premixed Flame Response to Acoustic Excitations [Volume 3, Issue 2, 2010, Pages 59-73]
Nadian, Mohammad Hossein Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Najafi, Arash Experimental and Theoretical Analysis of Flame Spread and Temperature in a Pool Fire-with Nanoparticle Effects[Volume 2, Issue 1, 2009, Pages 15-23]
Najafi, Bahman Study of the Effect of Ethyl Ester of Sunflower Oil and Its Different Mixtures with Diesel on Performance and Emission Parameters of a Turbocharged Direct Injection Diesel Engine [Volume 4, Issue 1, 2011, Pages 45-55]
Najafi, Bahman Experimental Investigation of the Effect of Using Biodiesel and Biogas on Dual Fuel Diesel Engine[Volume 4, Issue 1, 2011, Pages 73-86]
Najafi, Bahman Effect of Microalgae Biodiesel on Performance Parameters and Exhaust Emissions from IDI Diesel Engine[Volume 4, Issue 2, 2011, Pages 29-43]
Najafi, Bahman Effect of Fatty Acid Ethyl Esters in Biodiesel on Thermo-physical Properties [Volume 9, Issue 2, 2016, Pages 121-133]
Najafi, Bahman Investigation of the Impact of SiO2_Al2O3 nano-composite to biodiesel-diesel fuel on performance and emission of a diesel engine [Volume 13, Issue 2, 2020, Pages 25-39]
Najafi, Bahman The effect of ethanol as a biodiesel fuel additive on the performance and emissions of a dual-fuel diesel engine [Volume 15, Issue 3, 2022, Pages 139-164]
Najafi, Gholamhasan The Optimization of Surfactants Use to Produce Biodiesel-Diesel-Water Emulsion and Nano-Emulsion Fuels [Volume 10, Issue 1, 2017, Pages 1-12]
Najafi, Gholamhassan Optimization of biolubricant production process from biodiesel of Non-edible rapeseed using response surface method (RSM) [Volume 11, Issue 3, 2018, Pages 1-18]
Najafi, Gholamhassan Optimasiton of biodiesel production process from Non-edible rapseed using response surface method (RSM) [Volume 11, Issue 4, 2019, Pages 1-13]
Najafian, Mojtaba Experimental study of nebulized ethanol injection in radiative heat transfer and NOX pollutant of natural gas flame [Volume 16, Issue 4, 2023, Pages 16-27]
Najafian, Mojtaba Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Najafi Dorcheh Kalmarani, Mohammad Studying the Influence of Temperature and Residence Time on the Recovery of Oil Filter Components via Pyrolysis [Volume 16, Issue 2, 2023, Pages 31-53]
Nargessi, Zahra Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
Narimani Asl, Sina Introducing a novel spiral-channel combustion chamber and experimentally investigating the effect of nitrogen dilution on non-premixed micro methane-oxygen flame by spectroscopy method [Volume 15, Issue 3, 2022, Pages 73-99]
Nasrabadi, Masoud Development of an Autoignition Submodel for Knock Prediction inTurbocharged SI Engine[Volume 3, Issue 2, 2010, Pages 75-91]
Nassiri Toosi, Ali Numerical investigation of soot phenomenon in a CI engine [Volume 11, Issue 3, 2018, Pages 47-64]
Nazari, Mohsen Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Nazarpor, Mehrshad Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Nematolahzadeh, Ali Investigation of the Impact of SiO2_Al2O3 nano-composite to biodiesel-diesel fuel on performance and emission of a diesel engine [Volume 13, Issue 2, 2020, Pages 25-39]
Niazmand, Hamid Investigating the effect of direct heating of natural gas on soot formation, flame temperature, luminosity and emissions: A Combined Experimental and Numerical Approach [Volume 11, Issue 1, 2018, Pages 83-99]
Niazmand, Hamid Numerical study of the effect of ambient air temperature and relative humidity on diesel pool fire [Volume 17, Issue 2, 2024, Pages 57-76]
Nikbakht, AliMohammad Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Nikfar, Majid A Numerical Investigation with Experimental Test of Combined Porous-Free Flame Burner and Its Comparisonwith a Porous Burner[Volume 5, Issue 2, 2012, Pages 77-91]
Nikian, Mohammad Numerical and Experimental Investigation of the Transient Mixing Dynamics of Compressible Helium Impinging Jet Using Time-Resolved Schlieren Imaging and Computational Fluid Dynamics Simulation [Volume 19, Issue 1, 2026, Pages 78-106]
Nikoomaram, Hanieh Fire Risk Assessment of Diesel Fuel Storage Tanks in Mashhad Power Plants Using the Bow-Tie Technique and the Development of Appropriate Control and Mitigation Measures[Volume 19, Issue 2, 2026, Pages 1-19]
Nikzadfar, Kamyar Experimental investigation of the effects of the high cetane number fuel injection on the performance of a direct injection low-temperature combustion engine [Volume 15, Issue 3, 2022, Pages 20-49]
Njafi, Bahman Effect of Fatty Acid Ethyl Esters in Biodiesel Fuel on Diesel Engine Performance[Volume 5, Issue 2, 2012, Pages 25-34]
Nobakhti, Mohamadhasan Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
Noorollahy, Mansour Calculation of Mixture Equilibrium Binary Interaction Parameters in Thermodynamic Models Using Closed Cup Flash Point[Volume 1, Issue 2, 2008, Pages 13-20]
Noroozi, Mohammad Javad Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]
O
Omidi, Mohammad An experimental study of stable combustion and flashback phenomenon in a double-layer porous burner [Volume 10, Issue 1, 2017, Pages 13-24]
Omidkhah, Mohammad Reza Investigation ofthe Effects of Oxygenate and Nitrate Component Additives on Physico-Chemical Properties and Exhaust Emission of Diesel Fuel [Volume 1, Issue 2, 2008, Pages 17-26]
Omidvar, Amir A Dynamic Analysis of Fuel Droplets Breakup and Modification of Taylor Analogy Breakup (TAB) with Respect to Density Ratio Effects [Volume 2, Issue 2, 2009, Pages 2-10]
Omidvar, Amir Predicting of Physical Properties and Atomization Characteristics of the Biofuel Derived from Chlamydomoinas Microalga [Volume 3, Issue 2, 2010, Pages 47-58]
Omidvar, Amir Evaluation of Unity Lewis Number Assumption in Modeling of Water and Fuel Droplets Evaporation [Volume 6, Issue 1, 2013, Pages 64-72]
Omidvar, Amir Experimental investigation on the effect of diesel-biodiesel blends on waste heat recovery capability of a small power generator [Volume 11, Issue 4, 2019, Pages 29-41]
Ommi, Fathollah Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
Ommi, Fatolah Investigation ofthe Effects of Oxygenate and Nitrate Component Additives on Physico-Chemical Properties and Exhaust Emission of Diesel Fuel [Volume 1, Issue 2, 2008, Pages 17-26]
Ommi, Fatollah Investigation of the Soot and NO Emission Reduction Mechanism in DI Diesel Engines by Means of Split Injection Strategy[Volume 3, Issue 2, 2010, Pages 91-103]
Ommi, Fattolah Modeling a Planar Solid Oxide Fuel Cell for Combined Heat andPower Systems[Volume 2, Issue 1, 2009, Pages 14-40]
Oni, Abbas Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
P
Pahlavanzadeh, Hassan Removal of sulfur dioxide pollutant from combustion gases through catalytic reaction and conversion that to sulfur [Volume 11, Issue 3, 2018, Pages 79-92]
Pakravan, Hossein Ali Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Pakzad, Mohsen Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Palizvani, Mohammad Reza Numerical study of the effect of mass flow rate and ratio of fuel to oxidizer on thrust, specific impulse and chamber pressure of a hybrid rocket based on paraffin fuel combustion [Volume 17, Issue 3, 2024, Pages 97-122]
Parhizkar, Hamid Numerical modeling and parametric analysis of the geometrical factors of combustion chamber in a solid fuel ramjet engine [Volume 17, Issue 1, 2024, Pages 19-50]
Parsa, Somayeh Exergy Analysis of a Diesel Engine using Multi-zone Combustion Model [Volume 6, Issue 1, 2013, Pages 49-63]
Parsaee, Mostafa Biogas production from sugar cane vinasse using a Static Granual Bed Reactor (SGBR) [Volume 11, Issue 2, 2018, Pages 69-78]
Pasdarshahri, Hadi Large Eddy Simulation of Fire-induced Flow behind a Combustible Vertical Wall [Volume 6, Issue 1, 2013, Pages 17-31]
Pasdarshahri, Hadi A Comprehensive study on simulation of turbulent combustion using modified perfectly stirred reactor model [Volume 12, Issue 2, 0, Pages 89-101]
Pasdarshahri, Hadi Effects of combustion model in predicting pool fire and fire plum behaviors using a large eddy simulation method [Volume 12, Issue 3, 0, Pages 87-105]
Pasdarshahri, Hadi Numerical simulation and experimental investigation of a premixed cylindrical burner with gas mixing system using in condensing boiler [Volume 12, Issue 4, 2019, Pages 33-50]
Pasdarshahri, Hadi Numerical Investigation of Magnetic Field Effect on the Non-Premixed Methane Flame Behavior [Volume 13, Issue 1, 2020, Pages 1-17]
Pasdarshahri, Hadi Accuracy of Sub-grid Models in Internal Fire Whirl Modeling by Large Eddy Simulation [Volume 13, Issue 2, 2020, Pages 41-56]
Pasdarshahri, Hadi Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
Pasdar Shahri, Hadi Investigation of Swirl Number and Exhaust Gas Recirculation Impact in Numerical Simulation of Common Dual Fuel Power Plant Burner [Volume 10, Issue 1, 2017, Pages 25-45]
Pashaei, Jafar Investigating the Behavior of Natural Gas Flame in a Spark Ignition Engine [Volume 10, Issue 1, 2017, Pages 59-74]
Passandideh Fard, Mohammad On a Numerical Model for Gasification of Biomass Materials: An Alternative Method to Combustion [Volume 1, Issue 1, 2008, Pages 1-8]
Pirozfar, Vahid Investigation ofthe Effects of Oxygenate and Nitrate Component Additives on Physico-Chemical Properties and Exhaust Emission of Diesel Fuel [Volume 1, Issue 2, 2008, Pages 17-26]
Poolaei Moziraji, Zahra Thermo-economic modeling and analysis of the combined cooling, heat and power systems (CCHP) based on a fuel cell and micro gas turbine [Volume 17, Issue 3, 2024, Pages 78-96]
Poorghasemi, Kamran Investigation of the Soot and NO Emission Reduction Mechanism in DI Diesel Engines by Means of Split Injection Strategy[Volume 3, Issue 2, 2010, Pages 91-103]
Poormahmood, Ata An Experimental Study on the Operating Parameters of a Simplex Swirl Injector [Volume 9, Issue 1, 2016, Pages 75-84]
Poormahmood, Ata Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
Poormahmood, Ata Numerical Investigation of Supercritical Mixing dynamics of the Coaxial Swirl Injectors [Volume 15, Issue 4, 2022, Pages 20-44]
Porvosogi, Navid Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Pourabdollah, Kobra Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
Pourdarbani, Razieh Investigation of the Impact of SiO2_Al2O3 nano-composite to biodiesel-diesel fuel on performance and emission of a diesel engine [Volume 13, Issue 2, 2020, Pages 25-39]
Pourdarbani, Razieh Sustainable power generation from a dual fuel diesel engine in the presence of biodiesel, bioethanol and biogas: evaluation using the life cycle method [Volume 16, Issue 2, 2023, Pages 1-30]
Pourfateh, Ali Akbar Numerical simulation of combustion in a fired heater and providing a solution to reduce the flue gases temperature [Volume 16, Issue 3, 2023, Pages 85-94]
Pourmousavi, Iman Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]
Pourmousavi Kani, Seyyed Iman Experimental investigation of the effects of the high cetane number fuel injection on the performance of a direct injection low-temperature combustion engine [Volume 15, Issue 3, 2022, Pages 20-49]
Pourmousavi Kani, Seyyed Iman Numerical investigation of performance parameters and emission of NOx pollutant of RCCI engine with methane-diesel fuel at different injection times and equivalence ratios [Volume 16, Issue 1, 2023, Pages 40-60]
Pourtaghi Yousefdeh, Sadegh Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
R
Rahchamani, Jalal Preparation of energetic Al/CuO/RDX nanocomposite with enhanced reactivity [Volume 17, Issue 1, 2024, Pages 87-97]
Rahimi, Arash A Comparison of two Different Configurations of Multi-Zone Combustion Model for Natural Gas/n-Heptane Blend in HCCI Combustion Engines[Volume 2, Issue 2, 2009, Pages 41-56]
Rahimi, Sajjad Investigating the effects of molecular diffusion and hydrogen-enrichment on methane-air stratified swirl flame [Volume 15, Issue 2, 2022, Pages 57-74]
Rahmani, Farhad Production of Green Fuel Biodiesel from Sunflower Oil Using K2O Nanoparticles Sonochemically Immobilized over Bentonite [Volume 13, Issue 2, 2020, Pages 89-101]
Rahmani, Hamidreza Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Rahmani, Hamidreza Functional Analysis of Combustion Products in Heating Systems Assisted by Non-Thermal Plasma Technology: An Experimental Study [Volume 19, Issue 1, 2026, Pages 56-77]
Rahmani, Hamidreza Numerical and Experimental Investigation of the Transient Mixing Dynamics of Compressible Helium Impinging Jet Using Time-Resolved Schlieren Imaging and Computational Fluid Dynamics Simulation [Volume 19, Issue 1, 2026, Pages 78-106]
Rahmati, A.R. Three dimensional simulation of the pulverized coal combustion inside tuyere of the blast furnace in Isfahan Steel [Volume 11, Issue 1, 2018, Pages 1-27]
Rahmati, Mahmoud Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]
Rajabi Zargarabadi, Mehran کاهش تولید اکسید نیتروژن در محفظه احتراق با استفاده از جتهای پایدار کننده [Volume 8, Issue 1, 2015, Pages 45-58]
Rajabi Zargarabadi, Mehran Prediction of turbulent Prandtl number in the methane-air combustion using a second-order turbulent scalar flux model [Volume 12, Issue 2, 0, Pages 31-48]
Ramezani, Ali Low Frequency Combustion Instability Analysis in LRE by Using Double Time Lag Theory[Volume 1, Issue 1, 2008, Pages 61-74]
Ramezani, Alireza Experimental study of liquid film thickness formed by spray impingement on a solid surface [Volume 13, Issue 2, 2020, Pages 57-72]
Ramezani, Alireza Investigation of injector dimension on the performance of combustion chamber of a bi-propelant thruster [Volume 13, Issue 4, 2020, Pages 63-78]
Ramezani, Alireza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Ranjbaran, Alireza Determination of radial distribution of flame temperature and flame velocity by the thermocouple [Volume 11, Issue 4, 2019, Pages 85-100]
Rashvand, Mahdi Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]
Rasouli, Majid Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Rasouli Oskuei, Ehsan Numerical simulation of turbulent premixed flames using strained flamelet model [Volume 16, Issue 1, 2023, Pages 125-141]
Rastegari, Hajar Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Rastgoo, Sajad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Reyhanian, Masoud RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]
Rezaei, Javad Preparation and evaluation of hydrogen electrode based on nickel nanoparticles on the graphene in water electrolysis [Volume 11, Issue 3, 2018, Pages 19-28]
Rezaei, Meysam Fire Risk Assessment of Diesel Fuel Storage Tanks in Mashhad Power Plants Using the Bow-Tie Technique and the Development of Appropriate Control and Mitigation Measures[Volume 19, Issue 2, 2026, Pages 1-19]
Rezaeibakhsh, Mohammad Reza An Experimental Study of Flashback Phenomenon in a Two-Layer Porous Media[Volume 5, Issue 1, 2012, Pages 31-42]
Rezayat, Sajjad Prediction of NOx Emissions in an Industrial Gas Turbine Combustor Using Large Eddy Simulation and Reactor Network Modeling [Volume 11, Issue 2, 2018, Pages 91-117]
Rezayat, Sajjad Numerical Study of Soot Formation of Pre-vaporized Heavy Hydrocarbon Combustion in a Diffusion Flame [Volume 17, Issue 2, 2024, Pages 1-19]
Rezvani Vand Fanayi, Adel Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Riazi, Roozbeh V-Shaped and M-Shaped Premixed Flame Response to Acoustic Excitations [Volume 3, Issue 2, 2010, Pages 59-73]
Riazi, Rouzbeh Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Riazi, Rouzbeh The effect of pre-heating and dilution level on the combustion field and flue gas composition of an oxy-MILD combustion system in a laboratory-scale furnace [Volume 12, Issue 3, 0, Pages 53-71]
Rostaiy, Saeed Studying wall shear layer in ultrasonic cavity flow using numerical simulation [Volume 11, Issue 1, 2018, Pages 69-82]
Rostami, Elyas Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
Rostampoor, Amir Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
Rostampour, Arman Numerical investigation of the effect of APFI concept on some combustion characteristics of Turbo-Charged SI engine [Volume 11, Issue 3, 2018, Pages 93-111]
Rostampour, Vahid Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Rowhani, Amir An Experimental Study of the Effects of Swirl and Air Dilution onNG Non-Premixed Flame Stability[Volume 3, Issue 1, 2010, Pages 21-34]
S
Saadati, Hamidreza Numerical modeling and parametric analysis of the geometrical factors of combustion chamber in a solid fuel ramjet engine [Volume 17, Issue 1, 2024, Pages 19-50]
Saberimehr, Ali Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]
Saboji, Shadi A New Thermodynamic Model for Determination of Cylinder Volume Deformation and TDC Position[Volume 4, Issue 1, 2011, Pages 1-11]
Sabzpooshani, Majid Investigation of the Friction Effects on Instability of the One-Dimensional Gaseous Detonation Waves in the Mixtures with Low Activation Energy[Volume 4, Issue 1, 2011, Pages 56-72]
SadatAkhavi, MohammadReza Experimentally investigation of flame temperature distribution inside a can type combustor [Volume 11, Issue 2, 2018, Pages 51-67]
Sadeghi, Mohammad Taghi Turbulence Modeling in a Lifted Diffusion Jet Flame Issuing into a Hot and Dilluted Coflow [Volume 6, Issue 1, 2013, Pages 85-101]
Saeidi, Mohammad Hasan Investigation of accuracy and precision of k-ω and k-ε turbulence models in the furnace with the flameless combustion mode [Volume 17, Issue 3, 2024, Pages 1-18]
Safaei Arshi, Atieh Numerical investigation of soot phenomenon in a CI engine [Volume 11, Issue 3, 2018, Pages 47-64]
Safaei Arshi, Atieh Numerical investigation of the effect of APFI concept on some combustion characteristics of Turbo-Charged SI engine [Volume 11, Issue 3, 2018, Pages 93-111]
Safari, Reza Carbon Dioxide Removal and Biomass Production from Methane Combustion in the Photobioreactor using Microalgae Spirulina [Volume 10, Issue 1, 2017, Pages 47-58]
Safarzadeh, Mohammad Accuracy of Sub-grid Models in Internal Fire Whirl Modeling by Large Eddy Simulation [Volume 13, Issue 2, 2020, Pages 41-56]
Safarzadeh, Mohammad Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
Safarzadeh, Mohammad Numerical simulations of evaporation rate and fuel temperature under the transient radiative heat flux in the case of pool fire [Volume 15, Issue 2, 2022, Pages 90-107]
Safarzadeh, Mohammad Numerical study of the effect of the water mist nozzle location on fire extinguishing system in shielded fire [Volume 15, Issue 4, 2022, Pages 1-19]
Safarzadeh, Mohammad Numerical study of pool fire radiation hazards in large-scale petroleum derivatives storage tanks in windless condition [Volume 16, Issue 1, 2023, Pages 107-124]
Safavinezhad, Ali Automatic reduction of detailed combustion mechanisms using particle swarm optimization, differential evolution and angular modulation algorithms: application to Dimethyl Ether/air combustion [Volume 15, Issue 1, 2022, Pages 102-122]
Safieddin Ardebili, Seyed Mohammad Biodiesel production from fish waste oil by combination of mechanical stirrer and microwave [Volume 10, Issue 3, 2017, Pages 1-14]
Safieddin Ardebili, Seyed Mohammad Optimization of performance and Emission Characteristic of Fusel Oil – Diesel blends Using Response Surface Methodology [Volume 10, Issue 3, 2017, Pages 93-104]
Saidi, Majid Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
Saidi, Mohammad Hassan Improvement of combustion characteristics for hydrogen-air mixture using modular structure in a novel micro combustor [Volume 12, Issue 4, 2019, Pages 1-13]
Saidi, Mohammad Hassan Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Saidi Neicharan, Mohammad Reza An Experimental Investigation of a Diesel Engine Ignition Delay using Biodiesel and Diesel Fuels[Volume 2, Issue 1, 2009, Pages 55-69]
Salari, Mohammad Numerical Analysis of the Effects of Needle Lift and Seat on the Cavitation Flow in the Diesel Injector Nozzle [Volume 8, Issue 2, 2015, Pages 55-70]
Salavati-Zadeh, Ali A Kinetic Investigation on the Effects of Hydrogen Enrichment on Pollutants and Greenhouse Gases Emissions of Gas-fuelled Engines in High Compression Ratio [Volume 9, Issue 1, 2016, Pages 85-98]
Salehi, Mohammad Mahdi Numerical simulation of turbulent premixed flames using strained flamelet model [Volume 16, Issue 1, 2023, Pages 125-141]
Salehi, Mohammad Mehdi Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2022, Pages 124-145]
Sani, Sina Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Sarabadani, Atiyeh Investigation of injector dimension on the performance of combustion chamber of a bi-propelant thruster [Volume 13, Issue 4, 2020, Pages 63-78]
Sarabi, Mehrdad Experimental study of laminar burning velocity for dual fuel (Gasoline-NG)-Air mixture using pressure record in a spherical combustion bomb at higher primary pressure [Volume 11, Issue 1, 2018, Pages 121-134]
Sarbaz Karajabad, Morteza Numerical investigation of the effect of grain fuel composition in ramjet combustion chamber on ignition delay time and solid fuel regression rate [Volume 16, Issue 1, 2023, Pages 61-82]
Sarfarazi, Mahdi Numerical investigation of performance parameters and emission of NOx pollutant of RCCI engine with methane-diesel fuel at different injection times and equivalence ratios [Volume 16, Issue 1, 2023, Pages 40-60]
Sarrafan sadeghi, Soroush Evaluation of Methane Oxygen Premixed Flame Dynamics in a Meso Scale Reactor via RGB Image Processing [Volume 19, Issue 1, 2026, Pages 107-132]
Sarrafan Sadeghi, Soroush Introducing a novel spiral-channel combustion chamber and experimentally investigating the effect of nitrogen dilution on non-premixed micro methane-oxygen flame by spectroscopy method [Volume 15, Issue 3, 2022, Pages 73-99]
Sarrafan Sadeghi, Soroush Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
Sarvari, Ali Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
Sarvari, Ali Numerical Study of Trans/Supercritical Jets Mixing of Bi-Shear Injectors Under Excitation [Volume 16, Issue 3, 2023, Pages 60-76]
Seddiq, Mahdi Applying the Homogeneity Factor to Evaluate the Effects of Pilot Injection Characteristics on Air-Fuel Mixing Quality and Engine Performance in a Turbo-Charged High Speed Direct Injection (HSDI) Diesel Engine [Volume 10, Issue 2, 2017, Pages 53-71]
Seddiq, Mahdi Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]
Seddiq, Mahdi Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Sedghi, Mohamadhasan Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
Sepahi-Younsi, Javad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Sepahvand, Mehdi Numerical investigation of the effect of geometric parameter of porosity in the burner of ammonia-methane porous media [Volume 17, Issue 2, 2024, Pages 96-118]
Shadidi, Behdad Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Shadmir, Saeed Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Shafaee Roshani, Maziar Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Shafaghat, Rouzbeh The effect of adding DME to methane on HCCI combustion performance and emissions [Volume 10, Issue 3, 2017, Pages 65-77]
Shafaghat, Rouzbeh Numerical Study of the Effect of Adding Water with Different Temperatures to Low-Reactivity Fuel in a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 13, Issue 4, 2020, Pages 43-62]
Shahanaghi, Ali A Comprehensive study on simulation of turbulent combustion using modified perfectly stirred reactor model [Volume 12, Issue 2, 0, Pages 89-101]
Shahgholi, gholamhossein Life cycle evaluation of the effect of methyl tert-butyl ether as an oxygen additive on spark ignition engine performance and emissions [Volume 16, Issue 4, 2023, Pages 28-42]
Shahmardan, Mohammad Mohsen Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Shahmoradi, Ali Experimental investigation of combustion characteristics of hybrid nanofuel based on manganese oxide and graphene oxide nanoparticles in the diesel fuel [Volume 15, Issue 4, 2022, Pages 45-60]
Shahriari, Mohammad Javad Numerical simulation of industrial gas turbine combustion chamber using FGM method [(Articles in Press)]
Shahsavari, Mohammad Stability Characteristics and NOx Emissions of Low Swirl Flames[Volume 5, Issue 2, 2012, Pages 59-75]
Shahsavari, Mohammad Development of a Simple Model to Predict Cross Ignition Probability in Annular Combustors Equipped with EV Burners [Volume 11, Issue 2, 2018, Pages 1-12]
Shahsavari, Mohammad Prediction of NOx Emissions in an Industrial Gas Turbine Combustor Using Large Eddy Simulation and Reactor Network Modeling [Volume 11, Issue 2, 2018, Pages 91-117]
Shahsavari, Mohammad Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Shaker, Ahmad Numerical simulation of the syngas flame structure under air-fuel, oxygen enriched, and oxy-fuel regimes with flameless combustion: the impacts of fuel composition, preheating temperature, and oxygen mole fraction [Volume 15, Issue 4, 2022, Pages 61-82]
Shaker, Ahmad The effect of functional parameters includes thermal power, fuel to air ratio, and syngas composition on thermal conditions and flame structure under MILD and HTC regimes [Volume 17, Issue 2, 2024, Pages 76-95]
Shaker, Ahmad study of NO emission in syngas flameless combustion: The effect of inlet temperature, oxygen concentration, syngas composition and strain rate parameters [Volume 17, Issue 3, 2024, Pages 50-77]
Shamsadin Saeid, Mohammad Hosein Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
Sharifnia, Shahram Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Sharifzadeh, Reza Large eddy simulations of fuel-air mixing in a trapped vortex combustor-effect of cavity length to depth ratio [Volume 11, Issue 4, 2019, Pages 43-63]
Shayannejad, ardeshir Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]
SheikhDavoodi, Mohammad Javad Optimization of performance and Emission Characteristic of Fusel Oil – Diesel blends Using Response Surface Methodology [Volume 10, Issue 3, 2017, Pages 93-104]
Shekarian, Ali Akbar Numericalstudy of the effect of an incident shock wave on the combustion of transversalhydrogenjetina supersonic flow [Volume 8, Issue 2, 2015, Pages 1-12]
Shirneshan, Alireza Transient modeling of a D-type boiler with natural circulation loop: a study on boiler performance during a step change in load [Volume 15, Issue 1, 2022, Pages 25-52]
Shirneshan, Alireza Numerical and experimental investigation of the performance of a high-efficiency domestic gas stove burner using the response surface methodology [Volume 16, Issue 1, 2023, Pages 16-39]
Shojaei, Mohsen Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Shokrzadeh Damirchi, Alireza Numerical Investigation of Supercritical Mixing dynamics of the Coaxial Swirl Injectors [Volume 15, Issue 4, 2022, Pages 20-44]
Siaby, Mojtaba Simulation of combustion process in MTI4.244 diesel engine, in order to investigate the possibility of power enhancement and pollutant reduction [Volume 8, Issue 1, 2015, Pages 93-110]
Sohrabi, Aref 3D simulation and study of biogas combustion in C30 microturbine annular combustion chamber [Volume 17, Issue 1, 2024, Pages 72-86]
Sohrabi, Aref Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass [Volume 18, Issue 1, 2025, Pages 29-48]
Soltani, Elshan Numerical and Experimental Investigation of the Transient Mixing Dynamics of Compressible Helium Impinging Jet Using Time-Resolved Schlieren Imaging and Computational Fluid Dynamics Simulation [Volume 19, Issue 1, 2026, Pages 78-106]
Soltanian, Hossein Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Soroudi, mohammad ali CO pollutant Prediction of a Stationary Gas Turbine Combustor Using Finite Rate Eddy Dissipation Combustion Model [Volume 10, Issue 3, 2017, Pages 33-49]
Soroudi, Mohammad Ali Development of a Simple Model to Predict Cross Ignition Probability in Annular Combustors Equipped with EV Burners [Volume 11, Issue 2, 2018, Pages 1-12]
Soroudi, Mohammad Ali Prediction of NOx Emissions in an Industrial Gas Turbine Combustor Using Large Eddy Simulation and Reactor Network Modeling [Volume 11, Issue 2, 2018, Pages 91-117]
Soroudi, MohammadAli Effect of Time Rupture Prediction Model on Creep Life Estimation of V94.2 Engine Combustor [Volume 15, Issue 1, 2022, Pages 53-70]
Sotudeh Gharebagh, Rahmat Turbulence Modeling in a Lifted Diffusion Jet Flame Issuing into a Hot and Dilluted Coflow [Volume 6, Issue 1, 2013, Pages 85-101]
Sotudeh-Gharebagh, Rahmat An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
T
Tabasizadeh, Mohammad Modeling and Assessment the Effective Parameters of Biodiesel Production from Date Seed Oil via Conventional, Microwave and Ultrasonic methods [Volume 11, Issue 3, 2018, Pages 29-46]
Tabasizadeh, Mohammad The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
Tabatabaei, Meisam Modeling and optimization of performance and emissions of a diesel engine fueled with water-diesel emulsions containing metal-organic nanoparticles by machine learning [Volume 15, Issue 3, 2022, Pages 1-19]
Tabatabaei, Meisam Solketal production from glycerin as a gasoline fuel additive: Synthesis, physical and chemical properties, engine performance and emissions [Volume 15, Issue 3, 2022, Pages 50-72]
Tabatabaei, Seyed Mohammad Eliminating oil fuel and reducing energy consumption by optimizing the combustion performance of cement calciner using CFD [Volume 13, Issue 4, 2020, Pages 97-115]
Tabatabei, Meysam Effect of Waste and Bleaching Earth oil Derived Biodiesel on Diesel Engine Performance and Emissions[Volume 5, Issue 2, 2012, Pages 35-45]
Tabe jamaat, Sadegh Design, fabrication and evaluation of microturbine based on turbocharger with power generation purpose [Volume 19, Issue 1, 2026, Pages 133-156]
Tabejamaat, sadegh Studying the Effects of Temperature on Ignition of Methane-air Jet using LES Method [Volume 9, Issue 2, 2016, Pages 1-19]
Tabejamaat, Sadegh An Experimental Study of Propane/Oxygen and City Gas/Oxygen Laminar Diffusion Flames in Ddiluted and Preheating Cconditions [Volume 1, Issue 1, 2008, Pages 1-17]
Tabejamaat, Sadegh An Experimental Study of the Stability of City Gas and PropaneTurbulent Non-Premixed Flames under Diluting Conditions[Volume 2, Issue 1, 2009, Pages 1-14]
Tabejamaat, Sadegh An Experimental Study of the Effects of Swirl and Air Dilution onNG Non-Premixed Flame Stability[Volume 3, Issue 1, 2010, Pages 21-34]
Tabejamaat, Sadegh Numerical Simulation of the Effective Parameters on the Stability of Stoichiometric CH4/Air Premixed Combustion in a Micro-combustion Chamber[Volume 3, Issue 2, 2010, Pages 31-45]
Tabejamaat, Sadegh Effect of Oxygen Mass Fraction and Reynolds Number on Methane-Hydrogen Flame in MILD Regime using LES Method[Volume 5, Issue 1, 2012, Pages 1-29]
Tabejamaat, Sadegh Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Tabejamaat, Sadegh The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2022, Pages 1-18]
Tabejamaat, Sadegh Introducing a novel spiral-channel combustion chamber and experimentally investigating the effect of nitrogen dilution on non-premixed micro methane-oxygen flame by spectroscopy method [Volume 15, Issue 3, 2022, Pages 73-99]
Tabejamaat, Sadegh Experimental study of Ammonia-Methane mixture combustion in the micro gas turbine combustor [Volume 15, Issue 3, 2022, Pages 120-138]
Tabejamaat, Sadegh Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]
Tabejamaat, Sadegh The effect of swirl intensity on the probability of successful ignition and kernel propagation in the Amirkabir double swirl burner. [Volume 15, Issue 4, 2022, Pages 129-158]
Tabejamaat, Sadegh Experimental Study of Biogas Combustion in a Microturbine Combustion Chamber at Various CO2/NG Ratios [Volume 16, Issue 2, 2023, Pages 92-108]
Tabejamaat, Sadegh Experimental Study of Performance Parameters and Emissions of Microturbine Combustion Chamber Fueled by Synthetic Gas [Volume 17, Issue 3, 2024, Pages 19-37]
Tabejamaat, Sadegh Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Tabejamaat, Sadegh Evaluation of Methane Oxygen Premixed Flame Dynamics in a Meso Scale Reactor via RGB Image Processing [Volume 19, Issue 1, 2026, Pages 107-132]
TabeJamaat, sadegh Experimentally investigation of flame temperature distribution inside a can type combustor [Volume 11, Issue 2, 2018, Pages 51-67]
Taghizadeh-Alisaraei, Ahmad Modeling the effects of Carbon nanotubes added to diesel-biodiesel fuel blends on performance and emissions of a diesel engine using artificial neural network [Volume 10, Issue 2, 2017, Pages 1-16]
Taghizadeh-Alisaraei, Ahmad Modeling the effect of adding oxygen functionalized multi-walled carbon nanotube to diesel, biodiesel, and bioethanol fuel blends on performance and emission of a diesel engine using artificial neural network [Volume 13, Issue 2, 2020, Pages 103-116]
Taghizadeh-Alisaraei, Ahmad Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Tajabadi, Fariba Experimental investigation of combustion characteristics of hybrid nanofuel based on manganese oxide and graphene oxide nanoparticles in the diesel fuel [Volume 15, Issue 4, 2022, Pages 45-60]
Tajaddod, Hamid Numerical study of the effect of the water mist nozzle location on fire extinguishing system in shielded fire [Volume 15, Issue 4, 2022, Pages 1-19]
Tajik, Hamid reza Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]
Tajik, Hamid reza The effect of swirl intensity on the probability of successful ignition and kernel propagation in the Amirkabir double swirl burner. [Volume 15, Issue 4, 2022, Pages 129-158]
Takdastan, Afshin Biogas production from sugar cane vinasse using a Static Granual Bed Reactor (SGBR) [Volume 11, Issue 2, 2018, Pages 69-78]
Talebi, Mohammad Sadegh Investigating the effect of the plasma actuator on the degree of mixing in a burner with mild combustion conditions [Volume 17, Issue 1, 2024, Pages 1-18]
Talesh Amiri, Saleh Numerical Study of the Effect of Adding Water with Different Temperatures to Low-Reactivity Fuel in a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 13, Issue 4, 2020, Pages 43-62]
Tamsilian, Yousef Numerical study of premixed hydrogen/air combustion characteristics in a converging - diverging micro tube [Volume 13, Issue 3, 2020, Pages 27-43]
Tanabi, Hamed Investigation of the Soot and NO Emission Reduction Mechanism in DI Diesel Engines by Means of Split Injection Strategy[Volume 3, Issue 2, 2010, Pages 91-103]
Taqizadeh, Atie Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]
Tatari, Aliasghar Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Tavakoli, Teimur An Experimental Investigation of a Diesel Engine Ignition Delay using Biodiesel and Diesel Fuels[Volume 2, Issue 1, 2009, Pages 55-69]
Tavakoli Hashjin,, Teimur Effect of the Blends of Diesel and Biodiesel Made From Waste Cooking Oil on Compression-Ignition Engine (CI) Performance[Volume 1, Issue 1, 2008, Pages 53-59]
Teimouri, Mohsen Investigating combustion and emissions parameters in an ethanol fuelled low temperature combustion engine [Volume 11, Issue 3, 2018, Pages 65-77]
Teymoori, Alireza Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
Teymori-Omran, MIlad Investigation of environmental impact of bioethanol production from potato waste [Volume 13, Issue 1, 2020, Pages 36-49]
Timaji, Mehdi Large Scale Flame Acceleration Modeling by a New Combined Combustion Model[Volume 5, Issue 1, 2012, Pages 55-70]
Tolouei, Ali Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
Tolouei, Ali Numerical investigation of the effect of using porous catalytic media on the emission of ammonia fuel in the mesoscale combustor [Volume 18, Issue 2, 2025, Pages 49-69]
Torabi, Ali Reza Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Torkaman, Javad Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
Torkian, Mahdi Effect of Microalgae Biodiesel on Performance Parameters and Exhaust Emissions from IDI Diesel Engine[Volume 4, Issue 2, 2011, Pages 29-43]
V
Vaezi, Mahdi On a Numerical Model for Gasification of Biomass Materials: An Alternative Method to Combustion [Volume 1, Issue 1, 2008, Pages 1-8]
Vaezi Jaz, Mohamad Reza Experimental investigation of combustion characteristics of hybrid nanofuel based on manganese oxide and graphene oxide nanoparticles in the diesel fuel [Volume 15, Issue 4, 2022, Pages 45-60]
Vahdati, Hasan Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
Vakilipour, Shidvash Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Vakilipour, Shidvash Study of hydrogen-methane flame structure in Sydney swirl stabilized burner using volumetric combustion model [Volume 17, Issue 2, 2024, Pages 37-56]
Valimohammad, Afshin Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Veisi, Hadi Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Y
Yadollahi, Bizhan A Numerical Investigation of Combustion and Injection in a DISI CNG Engine [Volume 6, Issue 1, 2013, Pages 33-48]
Yari, Mortaza Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]
Yazdani, Abolfazl Numerical investigation of the effect of combustion and turbulence models in estimating the combustion characteristics of a fuel-rich propellant -case study: ramjet [Volume 15, Issue 2, 2022, Pages 108-135]
Yazdani, Moosa CO pollutant Prediction of a Stationary Gas Turbine Combustor Using Finite Rate Eddy Dissipation Combustion Model [Volume 10, Issue 3, 2017, Pages 33-49]
Yazdani Ahmadabadi, Hosein Analysis of Influence of Variable Airflow Distribution on Reactive Flow in a Gas Turbine Model Combustion Chamber [Volume 8, Issue 2, 2015, Pages 13-32]
Younesian, Hadi Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Yousefi Mojir, Kamran Numerical simulation of asphalt water slurry gasification process in an entrained flow gasifier [Volume 12, Issue 1, 2019, Pages 13-30]
Yousefzadeh, Ali 3D Simulation Considering Detailed Chemical Kinetics for a Homogeneous Charge Compression Ignition Engine Fueled with Methane and Dimethyl Ether [Volume 8, Issue 1, 2015, Pages 77-91]
Z
Zabetian Targhi, Mohammad Diagnostics of flame instability in a premixed surface flame burner using frequency analysis [Volume 13, Issue 1, 2020, Pages 67-80]
Zabetian Targhi, Mohammad Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Zabetian Targhi, Mohammad Numerical study of pool fire radiation hazards in large-scale petroleum derivatives storage tanks in windless condition [Volume 16, Issue 1, 2023, Pages 107-124]
Zabetian Targhi, Mohammad Effect of combustion products recycling system on temperature distribution and performance of flameless combustion furnace [Volume 16, Issue 2, 2023, Pages 109-130]
Zabetian Targhi, Mohammad Investigating the effect of arrangements of air and fuel inlets on the performance of flameless combustion furnace [Volume 16, Issue 3, 2023, Pages 21-39]
Zabetian Targhi, Mohammad Experimental Investigation of Flame Stability and Examination of Performance Map in a Structural Ceramic Porous Burner in Cooking Application [Volume 16, Issue 4, 2023, Pages 1-15]
Zabetian Targhi, Mohammad The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
Zabetian Targhi, Mohammad Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
Zadsirjan, Saeedreza The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2022, Pages 1-18]
Zadsirjan, Saeed Reza Design, fabrication and evaluation of microturbine based on turbocharger with power generation purpose [Volume 19, Issue 1, 2026, Pages 133-156]
Zahab, Salehe Designing a Gas Turbine Combustor Test Rig and Testing a Sample Combustor at Atmospheric Conditions [Volume 10, Issue 1, 2017, Pages 87-104]
Zahedi, Alireza Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]
Zaki Dizaji, Hasan Optimization of performance and Emission Characteristic of Fusel Oil – Diesel blends Using Response Surface Methodology [Volume 10, Issue 3, 2017, Pages 93-104]
Zamani, Mohamad-Amin Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Zamani, Mohammad Amin Investigation of accuracy and precision of k-ω and k-ε turbulence models in the furnace with the flameless combustion mode [Volume 17, Issue 3, 2024, Pages 1-18]
ZAMANI, REZA Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2022, Pages 61-84]
Zamani Sheshkal, Amir Numerical study on the effect of inlet geometry on stability and thermal conditions in ammonia-methane combustion in a furnace with a non-premixed burner [Volume 19, Issue 1, 2026, Pages 24-55]
Zamzamian, Amir Ali Effect of Microalgae Biodiesel on Performance Parameters and Exhaust Emissions from IDI Diesel Engine[Volume 4, Issue 2, 2011, Pages 29-43]
Zamzamian, Seyed Amir Hossein Experimental investigation of combustion characteristics of hybrid nanofuel based on manganese oxide and graphene oxide nanoparticles in the diesel fuel [Volume 15, Issue 4, 2022, Pages 45-60]
Zandi lak, Abbas Design, fabrication and evaluation of microturbine based on turbocharger with power generation purpose [Volume 19, Issue 1, 2026, Pages 133-156]
Zandilak, Abbas Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Zare, Hadi Employment of Statistical and Artificial Intelligence Techniques for Prediction of Combustion Dynamics in an Experimental Swirl-stabilized Combustor [Volume 9, Issue 1, 2016, Pages 1-22]
Zareei, Javad Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Zareh, Masoud Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
Zarei, Reza Investigation of Injection Angle Influence on an Air/Fuel Premixer Performance Using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 65-76]
Zarein, Mohammad Prediction and Optimization of Palm Biodiesel Characteristics Using Permittivity Properties and Response Surface Methodology [Volume 11, Issue 4, 2019, Pages 15-27]
Zarein, Mohammad Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]
Zarenezhad Ashkezari, Abbas Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
Zarin Ghalam Moghadam, Abdosamad Investigation ofthe Effects of Oxygenate and Nitrate Component Additives on Physico-Chemical Properties and Exhaust Emission of Diesel Fuel [Volume 1, Issue 2, 2008, Pages 17-26]
Zarringhalam Moghaddam, Abdossamad Calculation of Mixture Equilibrium Binary Interaction Parameters in Thermodynamic Models Using Closed Cup Flash Point[Volume 1, Issue 2, 2008, Pages 13-20]
Zarrin Ghalam Moghaddam, Abdosamad Experimental and Theoretical Analysis of Flame Spread and Temperature in a Pool Fire-with Nanoparticle Effects[Volume 2, Issue 1, 2009, Pages 15-23]
Zarvandi, Jalal Numerical Simulation of the Effective Parameters on the Stability of Stoichiometric CH4/Air Premixed Combustion in a Micro-combustion Chamber[Volume 3, Issue 2, 2010, Pages 31-45]
Zarvandi, Jalal Numerical Analysis Of Internal Ballistic Of Solid Fuel Micro-Thruster For Use In Space Applications [Volume 16, Issue 2, 2023, Pages 73-91]
Zavarian, Taha Numerical simulation of industrial gas turbine combustion chamber using FGM method [(Articles in Press)]
Zeinivand, Hamed Influence of Thermal Radiation Models on Prediction of Reactive Swirling Methane/Air Flame in a Model Gas Turbine Combustor[Volume 1, Issue 2, 2008, Pages 1-15]
Zeinivand, Hamed Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
Zeinivand, Hamed Numerical Study of Soot Formation of Pre-vaporized Heavy Hydrocarbon Combustion in a Diffusion Flame [Volume 17, Issue 2, 2024, Pages 1-19]
Zenouzi, Ali Effect of the Blends of Diesel and Biodiesel Made From Waste Cooking Oil on Compression-Ignition Engine (CI) Performance[Volume 1, Issue 1, 2008, Pages 53-59]
Zhiani, Mohammad Performance evaluation of non-noble and Inexpensive metal substrates for oxygen production in alkaline electrolysis [Volume 11, Issue 2, 2018, Pages 79-89]
Zhiani, Mohammad Preparation and evaluation of hydrogen electrode based on nickel nanoparticles on the graphene in water electrolysis [Volume 11, Issue 3, 2018, Pages 19-28]
Ziabasharhagh, Masud Simulation of Combustion in a Direct Injection Engine with Porous Media[Volume 5, Issue 1, 2012, Pages 71-85]
