Fuel and Combustion

Fuel and Combustion

Stability Characteristics and NOx Emissions of Low Swirl Flames

Authors
Mohammad Shahsavari
Mohammad Farshchi
Faculty of Aerospace Engineering, Sharif University of Technology, Tehran, Iran
Abstract

Low swirl combustion is an innovative method for stabilizing lean premixed flames. Understanding the stability characteristics and NOx emissions of low swirl flames as well as influence of interaction of several low swirl flames on stability characteristic and NOx emissions are necessary to make low swirl burners applicable to various combustion chambers. The primary objectives of this study are to assess flame stability characteristics and NOx emissions of vane swirl burners. Since in an annular combustor several burners are mounted next to each other, the influence of flames interactions on the stability and NOx emissions of low swirl flames are examined. The data show that the stability of low swirl flames is highly dependent on the fuel-air mixture velocity at the burner exit, the mixture equivalence ratio, and the fuel-air feeding startegy to achieve the desired flame. NOx emissions of a low swirl flame are insensitive to the the fuel-air mixture velocity at the burner exit at a given equivalence ratio, but they are directly proportional to the equivalence ratio. Individual burner stablility is maintained when they are arranged in any annular formation. Although flames interactions have no influence on the overall flame stability characteristics but they increase NOx emissions.
Keywords
Low swirl flame
Stability characteristics
NOx
Low swirl flames interactions
1.     D. Dunn-Rankin, Lean Combustion: Technology and Control, London, Academic Press, 2008.
2.     N. Syred, and J. M. Beer, “Combustion in Swirling Flows: A Review,” Combustion and Flame, l23, pp. 143-201, 1974.
3.     R. K. Cheng, D. T. Yegian, M. M. Miyasato, G. S. Samuelsen, C. E. Benson, R. Pellizzari and P. Loftus, “Scaling and Development of Low-Swirl Burners for Low-Emission Furnaces and Boilers,” Proceedings of the Combustion Institute, Vol. 28, pp. 1305-1313, 2000.
4.     Y. Huang, and V. Yang, “Dynamics and Stability of Lean-Premixed Swirl-Stabilized Combustion,” Journal of Progress in Energy and Science, 35, pp. 293-364, 2009.
5.     M. R. Johnson, D. Littlejohn, W. A. Nazeer, K. O. Smith, and R. K. Cheng, “A Comparison of the  Flowfields and Emissions of High-Swirl Injectors and Low-Swirl Injectors for Lean  Premixed Gas Turbines,” Symp. (Int.) Combust., 30, pp. 2867-2874, 2005.
6.     R. K. Cheng, “Velocity and Scalar Characteristics of Premixed Turbulent Flames Stabilized by Weak Swirl,” Combustion and Flame, 101, pp. 1-14, 1995.
7.     D. Dunn-Rankin, Lean Combustion Technology and Control, USA Elsevier, USA, 2008.
8.     D. T. Yegian and R. K. Cheng, “Development of a Lean Premixed low-Swirl Burner for Low NOxPractical Application,” Combustion Science and Technology, 139, pp. 207-227, 1998.
9.     D. T. Yegian and R. K. Cheng, “Development of a Vane-Swirler for Use in a Low NOx Weak-Swirl Burner,” Ernest Orlando Lawrence Berkeley National Laboratory, Berkeley, USA, Tech. Rep. LBNL 39354, 1996.
10.  R. K. Cheng, “Velocity and Scalar Characteristics of Premixed Turbulent Flames Stabilized by Weak Swirl,” Combustion and Flame, 101, pp. 1-14, 1995.
11.  R. K. Cheng and D. Littlejohn, “Effects of Combustor Geometry on the Flowfields and Flame Properties of a Low-Swirl Injector,” Proceedings of ASME Turbo Expo: Power for Land, Sea and Air, Berlin, Germany, 2008.
12.  M. Legrand, J. Nogueira, A. Lecuona, S. Nauri, and P. Rodriguez, “Atmospheric Low Swirl Burner Flow Characterization with Stereo PIV,” Exp. Fluids, 48, pp. 901-913, 2010.
13.  D. Sequera and A. Agrawal, “Emissions and Acoustics Measurements in a Low-Swirl Burner,” 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 2007.
14.  M. Shahsavari, and M. Farshchi, “Influence of a Vane Swirl Burner Characteristics on Stability Characteristics of the Low Swirl Flame”, 10th Aerospace Industries Organization Conference, Tehran, Iran, 2010 (In Farsi).