Fuel and Combustion

Fuel and Combustion

Keyword Index
A
  • Ammonia Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
  • Ammonia Numerical investigation of the effect of using porous catalytic media on the emission of ammonia fuel in the mesoscale combustor [Volume 18, Issue 2, 2025, Pages 49-69]
B
  • Biodiesel Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
  • Biodiesel Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
  • Biodiesel Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
  • Biodiesel Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
  • Bioenergy Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
  • Biofuel Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
  • Biomass Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
C
  • Chemical Reactor Network (CRN) Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
  • Clinoptilolite zeolite Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
  • CO emission The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
  • Co‑flow burner Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
  • Combustion Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
  • Combustion chamber Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
  • Combustion chamber Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
  • Combustion chamber Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
  • Combustion efficiency Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
  • Combustion scaling Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Conceptual design Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
  • Cooking application The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
D
  • Diesel Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
  • Dimensional Analysis Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Directed Relation Graph Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
  • Directed Relation Graph Error Propagation Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
  • Double Swirl Burner Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
  • Dual fuel combustion Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
E
  • Efficiency Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
  • Electrochemistry Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
  • Energy&‌‌‌ndash Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Enhanced Spark Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
  • Equivalence ratio Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
  • Equivalence ratio The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
  • Esterification Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
  • Exergy Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
  • Exergy analysis Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
  • Exergy analysis Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Experimental Setup Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
F
  • Fire Safety Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
  • Flameless Combustion Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Flue gas recirculation Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
  • Fuel Investigation of the effect of using unit waste gases as a fuel in a methane reformer furnace on syngas production [Volume 18, Issue 3, 2025, Pages 90-107]
  • Fuel additive Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
  • Furnace Investigation of the effect of using unit waste gases as a fuel in a methane reformer furnace on syngas production [Volume 18, Issue 3, 2025, Pages 90-107]
  • Furnace Heating Time Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
G
  • Gas burners Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
  • Genetic Algorithm Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
H
  • HLD Method Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
  • Hydrogen Combustion Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
  • Hydrophilicity &؛ Lipophilicity Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
  • Hypersonic Projectile Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
I
  • Igniter Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
J
  • JP-10 kinetics Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
K
  • Kalina Cycle Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
  • Keywords: Rapid-Response Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
M
  • Mechanism reduction Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
  • Methane Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
  • Methane-Oxygen Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
  • Microturbine Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass [Volume 18, Issue 1, 2025, Pages 29-48]
  • Multidisciplinary design optimization Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
N
  • Neem Seed Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
  • NOx emissions Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass [Volume 18, Issue 1, 2025, Pages 29-48]
O
  • Oleic acid Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
  • Oxygen additive Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
P
  • Pellet burner and thermal boiler Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
  • Perforated lining burner Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
  • Pollution prediction Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
  • Porous medium combustion Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
  • Proximate analysis Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
R
  • Ramjet Engine Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
S
  • Scramjet Engine Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
  • Sensitivity analysis Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
  • Separation of Water from Fuel Oil (Mazut) Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
  • Smoke management Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
  • Steam Reforming Investigation of the effect of using unit waste gases as a fuel in a methane reformer furnace on syngas production [Volume 18, Issue 3, 2025, Pages 90-107]
  • Steel reheating furnace Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
  • Supersonic Air Inlet Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
  • Sustainable Production Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
  • Swirl burner Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
  • Syngas Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass [Volume 18, Issue 1, 2025, Pages 29-48]
T
  • Thermal efficiency The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
  • Three-Stage Organic Rankine Cycle Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
  • Torch Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
  • Trigeneration Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
  • Turbine Combustor Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
U
  • Ultimate analysis Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
W
  • Waste Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
Z
  • Zeolite ZSM-5 Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]