Abaspour Fard, MohammadHossein Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Ahmadi Tonekaboni, Amirreza Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
Asadi, Ali Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Asadifard, Ali Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Asgharzadeh Karamshahlu, Alireza Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Ashouri, Ali Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
B
Babaei, Hadi Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
E
Eidi Attar Zade, Masoud Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
Eidi Attarzadeh, Masoud Development of a Rapid-Response Code Based on a Chemical Reactor Network for the Analysis of a Turbine Combustor [Volume 18, Issue 4, 2025, Pages 81-102]
Emami Barsari, Afshin Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Eslami, Fatemeh Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
F
Fahim, Mohammad Experimental Investigation of Methane-Oxygen Torch Ignite: Effects of Mass Flow Rate and Equivalence Ratio on Flame Length [Volume 18, Issue 2, 2025, Pages 70-82]
G
Gharehghani, Ayat Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
Gharehghani, Ayat Numerical investigation of the effect of using porous catalytic media on the emission of ammonia fuel in the mesoscale combustor [Volume 18, Issue 2, 2025, Pages 49-69]
H
Haghighi, Mohammad Thermodynamic Equilibrium Investigation of Sustainable Dimethyl Ether Green Fuel Production from Syngas by Gibbs Free Energy Minimization [Volume 18, Issue 4, 2025, Pages 124-143]
Hajialigol, Najmeh Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
Hajialigol, Najmeh Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Heyhat, Mohammad Mahdi The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
J
Jafarian, Karim Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Jahromi, Mehdi Conceptual design multi-disciplinary design optimization of CFM56-3 engine combustor [Volume 18, Issue 1, 2025, Pages 65-91]
Jalalipour, Milad Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Javadi, Zahra Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Jodat, Amin Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
K
Kalantari, Arash Analysis of a Biomass-Fueled Combined Heat, Power, and Cooling System Featuring Innovative Heat Recovery and a Triple Organic Rankine Cycle [Volume 18, Issue 2, 2025, Pages 1-30]
Karimi, Behrad Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Karimi, Shadi Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
Karimzadeh, Ramin Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Kavand, Matin The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
Keikha Moqaddam, Vahid Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Khadem, Javad Reduction of chemical kinetics of JP-10 Using the Directed Relation Graph Method [Volume 18, Issue 1, 2025, Pages 49-64]
Khoshbin, Reza Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
Khoshbin, Reza Thermodynamic Equilibrium Investigation of Sustainable Dimethyl Ether Green Fuel Production from Syngas by Gibbs Free Energy Minimization [Volume 18, Issue 4, 2025, Pages 124-143]
Kolahdooz, Habib Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
L
Latifi Poshtahani, Javad Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Mahmoodi, Mostafa Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Mehin Ghaffari Nia, Abdolreza Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Mehrpooya, Milad Numerical Study on Improving Atrium Smoke Control Performance Using CO-Driven Non-Uniform Makeup Air Distribution [Volume 18, Issue 3, 2025, Pages 74-89]
Mehrpooya, Milad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Mirvakili, Azadeh Investigation of the effect of using unit waste gases as a fuel in a methane reformer furnace on syngas production [Volume 18, Issue 3, 2025, Pages 90-107]
Mirzadeh, Mohammad Separation of water from Heavy Fuel Oil, Mazut, Hydrophilicity, Lipophilicity, HLD Method, Demulsifier [Volume 18, Issue 2, 2025, Pages 31-48]
Mohebbi, Arash Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
N
Najafian, Mojtaba Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Pourabdollah, Kobra Acid-Modified Clinoptilolite Zeolite as an Efficient Catalyst for Green Fuel Production through Oleic Acid Esterification [Volume 18, Issue 3, 2025, Pages 108-125]
R
Rahmani, Hamidreza Experimental investigation of the effect of using retarders on thermal efficiency in pellet-fired burners and boilers [Volume 18, Issue 1, 2025, Pages 115-132]
Rastgoo, Sajad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Rezvani Vand Fanayi, Adel Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
Rostampour, Vahid Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
S
Saidi, Majid Application and Comparison of Synthetic Zeolite (ZSM-5) and Natural Zeolite (Mordenite) Catalysts in Biodiesel Production from Neem seed-derived oil by Electrochemical Method [Volume 18, Issue 3, 2025, Pages 18-41]
Saidi, Mohammad Hassan Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Sarrafan Sadeghi, Soroush Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
Sepahi-Younsi, Javad Numerical investigation of the effects of cavity flameholder geometric parameters on the combustion performance of ramjet and scramjet engines [Volume 18, Issue 4, 2025, Pages 1-17]
Shadmir, Saeed Experimental Study and Optimization of the Equivalence Ratio in Gas Burners Using Genetic Algorithm for Performance Enhancement and Emission Reduction [Volume 18, Issue 2, 2025, Pages 96-112]
Shojaei, Mohsen Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Sohrabi, Aref Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass [Volume 18, Issue 1, 2025, Pages 29-48]
T
Tabejamaat, Sadegh Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Tolouei, Ali Impact of Dimensionless Parameters on the Combustion of the Carbon-Free Fuel of Ammonia/Methane blend in Porous Media [Volume 18, Issue 1, 2025, Pages 1-28]
Tolouei, Ali Numerical investigation of the effect of using porous catalytic media on the emission of ammonia fuel in the mesoscale combustor [Volume 18, Issue 2, 2025, Pages 49-69]
Torkaman, Javad Study of the characteristics of solid fuel derived from waste in Rasht city [Volume 18, Issue 2, 2025, Pages 83-95]
V
Vahdati, Hasan Evaluation of diesel engine performance and emissions in the presence of biodiesel, dimethyl carbonate, and diethylene glycol as oxygenated fuel additives from the point of view of Exergoenvironmental method [Volume 18, Issue 1, 2025, Pages 92-114]
Valimohammad, Afshin Numerical Simulation of the Effects of Inlet Shape on the Combustion Chamber Performance of a Hypersonic Projectile [Volume 18, Issue 4, 2025, Pages 18-49]
Z
Zabetian Targhi, Mohammad The effect of equivalence ratio on the combustion characteristics and CO emissions of a porous burner used for cooking applications [Volume 18, Issue 3, 2025, Pages 1-17]
Zabetian Targhi, Mohammad Experimental Evaluation of Burner Geometry Performance and its flame structure on Heating Rate of a MILD Steel Reheating Furnace [Volume 18, Issue 4, 2025, Pages 103-123]
Zamani, Mohamad-Amin Scalable Design of Flameless Combustion Furnaces Based on Dimensionless Groups and Three-Dimensional Numerical Analysis for Preserving the Distributed Reaction Regime [Volume 18, Issue 3, 2025, Pages 42-73]
Zandilak, Abbas Analysis and measurement of performance parameters of combustion by adding chamber to a double swirl burner [Volume 18, Issue 4, 2025, Pages 50-80]
Zareei, Javad Investigating power generation in a dual-fuel combustion process (hydrogen-diesel-biodiesel) in the presence of a combined oxygenated additive [Volume 18, Issue 3, 2025, Pages 126-146]
