Fuel and Combustion

Fuel and Combustion

Keyword Index
A
  • Activated carbon Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
  • Adsorption Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
  • Adsorptive Desulfurization Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
  • Arundo donax Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
  • Autoignition kernel The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
B
  • Biofuel Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
  • Biogas Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
  • Biomass Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
  • Bio-oil Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
  • Box-Behnken design Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
C
  • Catalytic Cracking Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
  • CJ detonation Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
  • CO Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
  • Coaxial shear injector Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
  • Combined Propellant Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
  • Combustion An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
  • Combustion Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
  • Combustion chamber Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
  • Combustion chamber Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
  • Combustion instability Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
  • Combustion model Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
  • Combustion model Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
  • Combustion pollutants Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
  • Combustion Regime Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
  • Computational Fluid Dynamics An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
  • Configuration of Counter-flow Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
  • Cryogenic injection and mixing Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
D
  • Deflagration-to-detonation transition Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
  • Density stratification Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
  • Desulfurization Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
  • Diesel injection timing Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
E
  • Eddy dissipation Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
  • Emission Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
  • Emission reduction Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
  • Exhaust Gas Recirculation Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
  • Experimental test The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
  • Experimental Testing Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
  • Extinction The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
F
  • Fixed bed reactor Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
  • Flamelet generated manifold Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
  • Flame Structure Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
  • Flame transfer function Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2021, Pages 37-60]
  • Flash evaporation Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
  • Full factorial Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
G
  • Gas turbine model combustion chamber Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
  • Gross indicated efficiency Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
H
  • Heat recovery boiler Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
  • Hydrogen production Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
  • Hypergolic Oxidizer Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
I
  • Ignition The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
  • Infinite chemistry Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
  • Inhomogeneous mixture Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
K
  • Keywords: Flame quenching Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
  • Keywords: Nanoparticles Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
  • Kinetic Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
L
  • Laminar Flow Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
  • Large Eddy Simulation Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
M
  • Maximum Entropy Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
  • Melting An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
  • Methane Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
  • Mixing layer Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
N
  • Natural gas An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
  • Natural gas Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
  • Non-premixed combustion Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
  • NOx Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
  • Numerical simulation 3D Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
  • Numerical Solution Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
O
  • OpenFOAM Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
  • Oxidant Composition Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
P
  • Pressure-Swirl Injector Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
  • Pyrolysis Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
R
  • Radiation Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
  • RCCI combustion Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
  • Reactive Mach stem Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
  • Response sesurface methodology Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
  • Response Surface Methodology Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
  • Rice Husk Ash Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
  • Rocket Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
  • Rose Damascena waste Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2021, Pages 19-36]
S
  • Sensitivity analysis Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
  • Silica Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
  • Simultaneous Combustion Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
  • Specific Impulse Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
  • Spray Combustion Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
  • Syngas Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
T
  • Thermal Condition of Wall Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
  • Thermal efficiency Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2021, Pages 85-99]
  • Thrust Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2021, Pages 61-84]
  • Thrust Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2021, Pages 100-122]
  • Titania Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
  • Transcritical condition Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
  • Transcritical injection.supercritical flame Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
  • Transient Thermal Numerical Simulation Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
  • Turbulent Combustion Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2021, Pages 124-145]
  • Turbulent jet The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2021, Pages 1-18]
W
  • Water Splitting Reaction Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Z
  • Zeolite Y Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]