Akbari Seneh, Rojiar Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Alipoor, Alireza Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Atarzadeh, Mohammadamin Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
Atayizadeh, Hassan Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2022, Pages 124-145]
B
Bayramlou, Behzad An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
Bazazzadeh, Mehrdad Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
Bazdidi-Tehrani, Farzad Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
Behzad, Ehsan Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2022, Pages 37-60]
C
Chahartaghi, Mahmood Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
E
Ebrahimi, Reza Investigation of the Effect of Chemical Kinetics and Combustion Model on the Flame Transfer Function of a Diluent Premixed Gas Turbine Using LES [Volume 14, Issue 4, 2022, Pages 37-60]
Ebrahimi Fordoei, Esmaeil Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
EMAMI, SOBHAN Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
F
Farshchi, Mohammad Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
Farshchi, Mohammad Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Farshchi, Mohammad Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
G
Ghiyasi, Mehdi Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
H
Haji Agha Alizade, Hossein Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Hajian, Davod Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Hashemi, Seyed Abdolmehdi Numerical study of the effect of wall thermal conditions and oxidant structure on the flame structure and combustion regime in non-premixed combustion furnace [Volume 14, Issue 3, 2021, Pages 98-122]
Havasi, Morad Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
Heidarinejad, GHassem Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
J
Jafari, Bahram Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Jahannama, Mohammad Reza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Jamali, Ali Akbar Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2022, Pages 61-84]
K
Kalati Hesari, Soroosh Analysis and modeling of heat recovery boiler with using of new fuels (biomass) with view point of pollution reduction [Volume 14, Issue 2, 2021, Pages 63-86]
Karimzadeh, Ramin Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
Karimzadeh, Ramin Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
Karimzadeh, Ramin Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Kebriaee, Azadeh Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Khadem, Javad Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
Khalaghi, Mahya Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Khaledian, Sirvan Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Khodaverdian, Roozbeh Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Khoshbin, Reza Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
M
Maerefat, Mehdi Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Mahdavi Moghaddam, Hossein Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
Mirnajafi, Seyed Mohammad An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
Mirsalim, Seyyed Mostafa Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Moosavi, Elham Adsorption Kinetics and Equilibrium of Model Fuel Desulfurization by Activated Carbon Synthesized from Rose Damascena Waste [Volume 14, Issue 4, 2022, Pages 19-36]
Morad, Mohammad Reza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Moradi, Gholamreza Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Moshir, Ghasem Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
Mostofizadeh, AliReza Investigation of the Effect of Centrifugal Acceleration on the Flame Propagation Speed in Premixed Combustion [Volume 14, Issue 4, 2022, Pages 100-122]
N
Nargessi, Zahra Six-lumped kinetic model for catalytic cracking of heavy gas oil over zeolite Y; considering deactivation catalyst [Volume 14, Issue 1, 2021, Pages 47-60]
Nazari, Mohsen Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Nazarpor, Mehrshad Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Nobakhti, Mohamadhasan Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
O
Ommi, Fathollah Numerical study of different flame regimes in the laminar counterflow spray [Volume 14, Issue 1, 2021, Pages 29-46]
P
Pakravan, Hossein Ali Numerical study of combustion characteristics for stoichiometric hydrogen-air mixture in rotating detonation engine (RDE) [Volume 14, Issue 1, 2021, Pages 73-94]
Pasdarshahri, Hadi Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
Poormahmood, Ata Numerical Investigation of Transcritical Mixing Dynamics of Bi-shear Injectors [Volume 14, Issue 2, 2021, Pages 41-61]
Pourtaghi Yousefdeh, Sadegh Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
R
Ramezani, Alireza Evaporation of Injected Oxidizer from a Pressure –Swirl Injector in a Low Pressure Combustion Chamber [Volume 14, Issue 1, 2021, Pages 95-116]
Rasouli, Majid Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Rostami, Elyas Experimental and Numerical Investigation of Atomization characteristics of Diesel and Mazut Fuel injected from a Pressure-Swirl Atomizer [Volume 14, Issue 3, 2021, Pages 33-58]
Rostampoor, Amir Synthesis and characterization of CuO, ZnO and CeO2 adsorbents based on silica derived from Rice husk ash and evaluation of its performance in the desulfurization process of model fuel [Volume 14, Issue 3, 2021, Pages 142-161]
S
Safarzadeh, Mohammad Large Eddy Simulation of Pool Fire using FGM Combustion Model and Compared with Other Combustion Models [Volume 14, Issue 3, 2021, Pages 123-141]
Salehi, Mohammad Mehdi Assessment of the progress variable variance modelling on large-eddy simulation of turbulent premixed flames using flamelet-generated manifold model [Volume 14, Issue 4, 2022, Pages 124-145]
Sarvari, Ali Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]
Seddiq, Mahdi Computational evaluation of the combustion chamber geometry and applying syngas in a heavy-duty off-road Reactivity Controlled Compression Ignition (RCCI) engine [Volume 14, Issue 1, 2021, Pages 117-143]
Sedghi, Mohamadhasan Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
Shadidi, Behdad Investigating the Effects of Co2O3, and ZnO, and Fe3O4 Nanoparticles on Methane yield during anaerobic Co-digestion of municipal organic solid waste using BMP Test. [Volume 14, Issue 3, 2021, Pages 1-15]
Shahmardan, Mohammad Mohsen Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Shamsadin Saeid, Mohammad Hosein Mechanisms governing the deflagration to detonation transition in inhomogeneous mixtures of H2-air; A study on the effect of blockage ratio [Volume 14, Issue 2, 2021, Pages 21-39]
Sharifnia, Shahram Optimization of Hydrogen Production over TiO2/Treated Zeolite Nanophotocatalyst using Response Surface Box-Behnken Design [Volume 14, Issue 3, 2021, Pages 17-32]
Soltanian, Hossein Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Sotudeh-Gharebagh, Rahmat An experimental study and 3D simulation of a cast iron rotary [Volume 14, Issue 2, 2021, Pages 1-19]
T
Tabejamaat, Sadegh The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2022, Pages 1-18]
Taghizadeh-Alisaraei, Ahmad Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Tatari, Aliasghar Pyrolysis of Arundo donax lignocellulosic wastes in a fixed bed reactor under CO2 atmosphere [Volume 14, Issue 1, 2021, Pages 61-72]
Teymoori, Alireza Analysis of susceptibility of CO and NOx pollutants due to change of stabilizing jets characteristics in a gas turbine model combustion chamber [Volume 14, Issue 2, 2021, Pages 101-121]
Y
Younesian, Hadi Experimental study of flame quenching phenomenon of mixed methane and air in the presence of perforated plates and porous barriers in a closed chamber [Volume 14, Issue 2, 2021, Pages 87-100]
Z
Zabetian Targhi, Mohammad Experimental analysis of heat transfer in a residentioal porous media burner [Volume 14, Issue 4, 2022, Pages 85-99]
Zadsirjan, Saeedreza The Experimental Study of the Autoignition Kernel Formation in a Jet [Volume 14, Issue 4, 2022, Pages 1-18]
ZAMANI, REZA Dynamic Analysis of Simultaneous Combustion for Solid and Liquid Propellants in Combined Propulsion System [Volume 14, Issue 4, 2022, Pages 61-84]
Zareh, Masoud Numerical simulation of the effect of the air-fuel ratio on NO emission reduction in a gas turbine combustor with a double swirler [Volume 14, Issue 2, 2021, Pages 123-145]
Zarenezhad Ashkezari, Abbas Influence of exhaust gas recirculation and TiO2 nanoadditives on performance and exhaust emission characteristics of ethanol/biodiesel/diesel blends in a compression ignition engine [Volume 14, Issue 3, 2021, Pages 59-97]
Zeinivand, Hamed Investigation of Transcritical Shear flow’s Dynamics in the GH2/LOX and GCH4/LOX Cryogenic Flames with Real Gas SLFM [Volume 14, Issue 1, 2021, Pages 1-27]