Development of a Simple Model to Predict Cross Ignition Probability in Annular Combustors Equipped with EV Burners

Document Type : Original Article

Authors

1 Combustion Chamber Department, Middle East Turbo Compressor Tech. Co (Turbotec)

2 Combustion Chamber Department, Middle East Turbo Compressor Tech. Co (Turbotec), Tehran

Abstract

Prediction of cross ignition is one of the most formidable challenges in annular combustors. In order to study cross ignition, it is necessary to consider at least a sector of a combustor comprising of at least three burners, which makes the study both numerically and experimentally expensive. In this light, developing an analytical method to predict cross ignition probability is of practical interest. The main objective of the present paper is to develop an analytical method to predict cross ignition probability in an annular combustor utilizing 18 second generation EV burners. The present model is developed based on the previously proposed model by Hirsch et al.[1]. Here, the developed model is validated against experimental data. Validations show that the present model can accurately predict cross ignition probability. The validated model is used to improve cross ignition probability in the investigated gas turbines. The present model can be used during the combustor design and optimization processes. Furthermore, the model can be utilized as a fly on tool in the gas turbine logic to improve cross ignition probability

Keywords


  1. A. H. Lefebvre, Gas Turbines Combustion, Taylor and Francis, London, 1999. 
  2. M. T. E. Smith, A. D. Birch, D. R. Brown and M. Fairweather, “Studies of ignition and flame propagation in turbulent jets of natural gas, propane and a gas with a high hydrogen content,” Proceedings of Combustion Institute, 21, pp. 1403-1408, 1988.
  3. T.  C. Liewen, Unsteady Combustor Physics, Cambridge University Press, London, 2016.
  4. J. F. Bourgouim, D. Durox, Th. Schuller and J. Beaunier, “Ignition dynamics of annular combustor equipped with multiple swirling injectors,” Combustion and Flame, 160, pp. 1398-1413, 2013.
  5. L. Esclapez, E. Riber and B. Cuenot, “Ignition probability of a partially premixed burner using LES,” Proceedings of the Combustion Institute, 35, pp. 3133-3141, 2015.
  6. M. Boileau, G. Staffelbach, B. Cuenot, T. Poinsot and C. Berat, “LES of an ignition sequence in a gas turbine engine,” Combustion and Flame, 154, pp. 2-22, 2008.
  7. C. Hirsch, T. Kuenzi, H. P. Knopfel, B. Paikert, C. Steinbach, W. Geng, and K. Dobbeling, “An annular combustor natural gas ignition model derived from atmospheric sector experiments,” ASME TURBO EXPO, NO. 30073, Amsterdam, 2002.
  8. B. Sforzo, J. Kim, J. Jagoda and J.S. Itzman, “Ignition Probability in a stratified turbulent flow with a sunken fire igniter,” Journal of Engineering for Gas Turbine and Power, 137, pp. 1-11, 2015.
  9. J. Seitzman and B. Sforzo, “Modeling Ignition Probability for Stratified Flows,” Journal of Propulsion and Power, 33, pp. 1294-1304, 2017.
  10. M. A. Soroudi, E. Mollahasanzadeh and N. Rasooli, “Prediction of Spark Ignition Performance in an Industerial Gas Turbine Combustor,” The 7th European Combustion Meeting (ECM2015), Hotel Hilton, Budapest, Hungary, 2015.
  11. M. Shahsavari, M. A. Soroudi, M. Yazdani, S. Montazerinejad and Y. Bagheri, “CO pollutant prediction of a stationary gas turbine combustor using finite rate eddy dissipation combustion model,” Fuel and Combustion, 10, pp. 33-49, 2017.
  12. ISA, Flammability Characteristics of Combustible Gases and Vapors, The Instrumentation Systems, and Automation Society, 1-55617-697-X, 1999.