1. A. R. Brown and et al., “Upgrading of Heavy Oil by Dispersed Biogenic Magnetite Catalysts,” Fuel, 185, 2016, pp. 442-448.
2. J. Singh and et al., “Studies on Thermal Cracking Behavior of Residual Feedstocks in a Batch Reactor,” Chemical Engineering Science, 59, No. 21, 2004, pp. 4505-4515.
3. S.Acey, Heavy oil cracking, Teesside Polytechnic, PhD Thesis, Teesside University, 1986.
4. P. Hudec, “FCC Catalyst–Key Element in Refinery Technology,” 45th International Petroleum Conference, Bratislava. 2011.
5. J. Singh and et al., “Reaction Pathways And Product Yields in Mild Thermal Cracking of Vacuum Residues: A Multi-Lump Kinetic Model,” Chemical Engineering Journal, 108, No. 3, 2005, pp. 239-248.
6. K. Faungnawakij, R. Kikuchi and K. Eguchi, “Thermodynamic Analysis of Carbon Formation Boundary and Reforming Performance for Steam Reforming of Dimethyl Ether,” Journal of Power Sources, 164, No. 1, 2007, pp. 73-79.
7. T. A. Semelsberger and R. L. Borup, “Thermodynamic equilibrium Calculations of Dimethyl Ether Steam Reforming and Dimethyl Ether Hydrolysis,” Journal of Power Sources, 152, 2005, pp. 87-96.
8. K. Faungnawakij, R. Kikuchi and K. Eguchi, “Thermodynamic Evaluation of Methanol Steam Reforming for Hydrogen Production,” Journal of Power Sources, 161, No. 1, 2006, pp. 87-94.
9. A. Hussain and et al., “Catalytic Cracking of Arabian Light VGO Over Novel Zeolites as FCC Catalyst Additives for Maximizing Propylene Yield,” Fuel, 167, 2016, pp. 226-239.
10. L. Zoccolillo, M. Alessandrelli and M. Felli, “Simultaneous Determination of Benzene and Total Aromatic Fraction of Gasoline by HPLC-DAD,” Chromatographia, 54, No. 9-10, 2001, pp. 659-663.
11. J. Solsvik, T. Haug-Warberg and H. A. Jakobsen, “Implementation of Chemical Reaction Equilibrium by Gibbs and Helmholtz Energies in Tubular Reactor Models: Application to the Steam–Methane Reforming Process,” Chemical Engineering Science, 140, 2016, pp. 261-278.
12. X. K. Gai and et al., “Catalytic Bitumen Cracking in Sub-and Supercritical Water,” Fuel Processing Technology, 142, 2016, pp. 315-318.
13. R. Maciel Filho and M. D. F. Sugaya, “A Computer Aided Tool for Heavy Oil Thermal Cracking Process Simulation,” Computers & Chemical Engineering, 25, No. 4, 2001, pp. 683-692.
14. A. M. Ickes, Fuel Property Impact on a Premixed Diesel Combustion Mode, University of Michigan, ProQuest Dissertations Publishing, 2009.
)