Laboratory study of the effect of coal dust in a blend of coal and methane

Document Type : Original Article

Main Subjects

References

  1. S. Shi, B. Jiang and X. Meng, “Assessment of gas and dust explosion in coal mines by means of fuzzy fault tree analysis,” International Journal of Mining Science and Technology, 28, 2018, pp. 991-998.
  2. M. Mittal, “Study of explosibility data of coal dust for designing explosion safety measures,” International Journal of Advanced Engineering Technology, 34, 2013, pp. 82-91.
  3. S. Hong, Z. Liu, E. Zhao, S. Lin, S. Qiu, J. Qian, H. Liu and S. Xia, “Comparison of behavior and microscopic characteristics of first and secondary explosions of coal dust,” Journal of Loss Prevention in the Process Industries, 49, 2017, pp. 382-394.
  4. C. W. Kauffman, “Agricultural dust explosions in grain handling facilities. In: Fuel-air explosions,” Proceedings of the International Conference on Fuel-Air Explosions held at McGill University, Montreal, Canada, pp. 305–47, 1981.
  5. R. Eckhoff, Dust Explosions in the Process Industries, Third ed. Gulf Professional Publishing, Elsevier, New York, 2003.
  6. R. A. Ogle, S. E. Dillon and M. Fecke, “Explosion from a smoldering silo fire,”
     process safety and environmental protection, 33, 2014, pp. 94–103.
  7. Q. Li, C. Yuan, Q. Tao, Y. Zheng and Y. Zhao, “Experimental analysis on post-explosion residues for evaluating coal dust explosion severity and flame propagation behaviors,” Fuel, 215, 2018, pp. 417–428.
  8. X. Wang, Y. Zhang, B. Liu, P. Liang and Y. Zhang, “Effectiveness and mechanism of carbamide/fly ash cenosphere with bilayer spherical shell structure as explosion suppressant of coal dust,” Journal of Hazardous Materials, 365, 2019, pp. 555–564.
  9. D. Wu, M. Schmidt and J. Berghmans, “Spontaneous ignition behaviour of coal dust accumulations: A comparison of extrapolation methods from lab-scale to industrial-scale,” Proceedings of the Combustion Institute, 37, 2018, pp. 4181-4191.
  10. M. J. Ajrash, J. Zanganeh anb B. Moghtaderi, “The effects of coal dust concentrations and particle sizes on the minimum auto-ignition temperature of a coal dust cloud,” Fire and Materials, 41, 2017, pp. 908-915.
  11. X. Zhang, J. Yu, W. Gao, D. Zhang, J. Sun, S. Guo and R. Dobashi, “Effects of Particle Size Distributions on PMMA Dust Flame Propagation Behaviors,” Powder Technology, 37, 2017, pp. 197-208.
  12. I. A. Zlochower, M. J. Sapko, I. N. Perera, C. B. Brown, M. L. Harris and N. S. Rayyan, “Influence of specific surface area on coal dust explosibility using the 20-L chamber,” Journal of Loss Prevention in the Process Industries, 54, 2018, pp. 103–109.
  13. A. Tascon, “Influence of particle size distribution skewness on dust explosibility,” Powder Technology, 338, 2018, pp. 438-445.
  14. D. P. Mishra and S. Azam, “Experimental investigation on effects of particle size, dust concentration and dust-dispersion-air pressure on minimum ignition temperature and combustion process of coal dust clouds in a G-G furnace,” Fuel, 227, 2018, pp. 424–433.
  15. S. Azam and D. P. Mishra, “Effects of particle size, dust concentration and dust-dispersion-air pressure on rock dust inertant requirement for coal dust explosion suppression in underground coal mines,” process safety and environmental protection, 126, 2019, pp. 35-43.
  16. B. Gan, B. Li, H. Jiang, D. Zhang, M. Bi and W. Gao, “Ethylene/polyethylene hybrid explosions: Part 2. effects of polyethylene particle size distribution on flame propagations,” Journal of Loss Prevention in the Process Industries, 55, 2018, pp. 134–143.
  17. J. Jiang, Y. Liu, C. Mashuga and S. Manna, “Validation of a new formula for predicting the lower flammability limit of hybrid mixtures,” Journal of Loss Prevention in the Process Industries, 35, 2015, pp. 52–58.
  18. J. Jiang, Y. Liu and S. Mannan, “A correlation of the lower flammability limit for hybrid mixtures,” Journal of Loss Prevention in the Process Industries, 32, 2014, pp. 120–126.
  19. R. Prugh, “The relationship between flash point and LFL with application to hybrid mixtures,” process safety progress, 27, 2008, pp. 156–163.
  20. K, Chatrathi, “Dust and hybrid explosibility in a 1m3 spherical chamber,” process safety progress, 13, 1994, pp. 327–340.
  21. J. G. Torrent, N. F. Anez, L. M. Pejic, A. B. Montes and J. M. Escobar, “Ignition and explosion parameters of Colombian coals,” Journal of Loss Prevention in the Process Industries, 43, 2016, pp. 706–713.
  22. R. Eades, K. Perry, C. Johnson and J. Miller, “Evaluation of the 20 L dust explosibility testing chamber and comparison to a modified 38 L vessel for underground coal,” International Journal of Mining Science and Technology, 28, 2018, pp. 885-890.
  23. S. H. Liu, Y. F. Cheng, X. R. Meng, H. H. Ma, S. X. Song, W. J. Liu and Z. W. Shen, “Influence of particle size polydispersity on coal dust explosibility,” Journal of Loss Prevention in the Process Industries, 56, 2018, pp. 444–450.
  24. T. Abbasi and S. A. Abbasi, “Dust explosions–Cases, causes, consequences, and control,” Journal of Hazardous Materials, 140, 2017, pp. 7–44.
  25. Standard test method for explosibility of dust clouds, ASTM: 2012; E1226-12a.
  26. M. J Moran, D. D. Shapiro and M. B Boettner,Fundamentals Of Engineering Thermodynamics, Cabral, S. 7th (ed.), Ideal Gas Mixture and Psychrometric Applications, Wiley Publ. Co., 2010.
  27. M. J Moran, D. D. Shapiro and M. B Boettner,Fundamentals Of Engineering Thermodynamics, Cabral, S. 7th (ed.), Ideal Gas Mixture and Psychrometric Applications, Wiley Publ. Co., 2010.

 

Files

History

  • Receive Date: 07 September 2019
  • Revise Date: 11 October 2019
  • Accept Date: 15 October 2019

Share

How to cite

Statistics