@article { author = {Kankashvar, BENYAMIN and TabeJamaat, sadegh and EidiAttarZade, Masoud and SadatAkhavi, MohammadReza and Aghayari, Majid}, title = {Experimentally investigation of flame temperature distribution inside a can type combustor}, journal = {Fuel and Combustion}, volume = {11}, number = {2}, pages = {51-67}, year = {2018}, publisher = {iranian combustion institute}, issn = {2008-3629}, eissn = {2008-3637}, doi = {}, abstract = {A gas turbine combustor has been investigated experimentally in this paper. The effect of air and fuel flow rates on the on combustor performance and lean blow out at atmospheric and steady condition is the goal. The combustor is a can type with swirl pressure fed injector. An axial swirler with swirl No. equal to 0.8 has been installed. The kerosene has been used as fuel while the air temperature at combustor inlet is equal to 315 K. The combustor Stability loop has been determined with several tests. Then variation of temperature inside the combustor and at combustor exit with respect to the injector back pressure and air flow rate are measured. 4 operating conditions have been selected due to detail investigation of flame temperature contour inside the combustor. The results show that the flame holds near the walls. Also, the pattern factor show that the best condition is when the flame is totally inside the combustor while the air flow rate is minimum. Furthermore, it is cleared that the lean blow out is not uniform. It means that with increasing the air flow rate, upper section of flame has been quenched and then the lower section of flame.}, keywords = {Gas turbine,combustor,test stand,atmospheric,temperature distribution}, title_fa = {مطالعه تجربی توزیع دمای محفظه احتراق استوانه‌ای در شرایط اتمسفریک}, abstract_fa = {در این پژوهش، محفظه احتراق توربین گاز نمونه به­صورت تجربی مورد مطالعه قرار می‌گیرد. هدف از این تحقیق بررسی اثر  دبی‌های مختلف سوخت و هوا بر عملکرد محفظه و نیز فرایند خاموشی رقیق از سوخت در شرایط پایا و اتمسفریک است. محفظه احتراق مورد بررسی از نوع استوانه‌ای بوده و سوخت مایع کروسین با استفاده از انژکتور پیچشی فشاری به محفظه احتراق تزریق می‌شود. چرخاننده محوری دارای عدد چرخش 0/8 بوده و دمای هوای ورودی به محفظه 315 کلوین است. در ابتدا، محدوده پایداری محفظه احتراق مشخص شده و سپس اثر فشار بالادست انژکتور و دبی هوا بر دمای گازهای درون محفظه و خروجی از آن اندازه‌گیری شد. به­منظور بررسی دقیق‌تر علت تغییر رفتار محفظه احتراق ناشی از تغییر دبی هوا، چهار نقطه عملکردی انتخاب شده و کانتور دمای درون محفظه احتراق استخراج شده است. نتایج نشان می‌دهد که شعله در ناحیه بالا و پایین محفظه احتراق و در مجاورت دیواره‌ها تشکیل می‌شود. بررسی ضریب یکپارچگی دمای خروجی از محفظه احتراق نشان می‌دهد که بهترین عملکرد در حالتی است که تمام شعله درون محفظه احتراق بوده و در عین حال، دبی هوا کمینه باشد. علاوه­بر این، مشخص شد که فرایند خاموشی محفظه احتراق در شرایط رقیق به­صورت یکنواخت نیست، بلکه با افزایش دبی هوا ابتدا شعله بالای محفظه احتراق و سپس شعله پایین خاموش شده و درنهایت منجر به خاموشی کل محفظه احتراق در شرایط رقیق از سوخت می‌شود.  }, keywords_fa = {محفظه احتراق,توربین گاز,آزمونگر,اتمسفریک,توزیع دما}, url = {https://www.jfnc.ir/article_70715.html}, eprint = {https://www.jfnc.ir/article_70715_6087a2d396320a67354d45abda9416eb.pdf} }