@article { author = {Aghaei, Erfan and ebrahiminejad, mitra and Khoshbin, Reza and Karimzadeh, Ramin and Moridi, Samira and Godini, Hamid Reza and Gorke, Oliver}, title = {Synthesis of mesoporous Y zeolite from pyrophyllite as Si and Al source used in gasoline and gasoil production from heavy oil}, journal = {Fuel and Combustion}, volume = {13}, number = {1}, pages = {50-66}, year = {2020}, publisher = {iranian combustion institute}, issn = {2008-3629}, eissn = {2008-3637}, doi = {10.22034/jfnc.2020.106136}, abstract = {Zeolite Y was successfully synthesized using alkali-fused pyrophyllite as the source of Si and Al without using template. Surfactant (CTAB) was used in order to create the mesopores in the synthesized Y zeolite. Physicochemical properties of the synthesized samples were investigated using XRD, FESEM, BET, FTIR, NH3-TPD, EDX and TGA characterizations. The properties and catalytic performance of the synthesized zeolites using pyrophyllite were compared with commercial Y zeolite. The results of XRD analysis showed that a pure Y zeolite has been synthesized using alkali-fused pyrophyllite in the presence of CTAB. Furthermore, the use of CTAB resulted in improving the textural and acidity properties of the synthesized sample. Moreover, the catalytic activity of the synthesized zeolites was tested in a fixed bed reactor. The synthesized sample with CTAB, for the case of heavy oil conversion to light fuels showed a conversion of up to ca. 60%. It was observed that the light fuels selectivity such as gasoline and gasoil as well as gaseous production over modified zeolite with CTAB was higher than the other samples. Due to the presence of mesopores and better accessibility of the feed molecules to the catalytic active sites, the CTAB-synthesized sample showed higher catalytic activity as well as gaseous products formation.}, keywords = {Y zeolite,pyrophyllite,CTAB,heavy oil cracking}, title_fa = {سنتز زئولیت مزو حفره Y با استفاده از پیروفیلایت به عنوان منبع Si و Al به منظور استفاده در فرآیند تولید بنزین و دیزل از روغن سنگین}, abstract_fa = {زئولیتY بدون حضور ماده الگوساز و با استفاده از پیروفیلیت ذوب قلیایی شده به عنوان منبع Si و Al با موفقیت سنتز شده است. سورفکتنت (CTAB) جهت ایجاد حفرات مزو در زئولیت Y سنتزی مورد استفاده قرار گرفت. خواص فیزیکی-شیمیایی نمونه‌ها با استفاده از آنالیزهای XRD، FESEM، BET، FTIR،NH3-TPD ، EDX   بررسی شده است. خواص و عملکرد کاتالیستی زئولیت‌های سنتز شده با استفاده پیروفیلیت با زئولیت Y تجاری مقایسه شده است. نتایج آنالیز XRD سنتز زئولیت Y با خلوص بالا با استفاده از پیروفیلیت ذوب قلیایی شده در حضور CTAB را تأیید می‌کند. همچنین، با استفاده از CTAB خواص بافتی و اسیدیته نمونه سنتزی بهبود یافت. فعالیت کاتالیستی زئولیت‌های سنتز شده در راکتور بستر ثابت مطالعه شده است. نمونه سنتز شده با استفاده از CTAB جهت تبدیل روغن سنگین به سوخت‌های سبک میزان تبدیلی بالاتر از 60% نشان داد. همچنین، انتخاب‌پذیری بالاتری نسبت به سوخت‌های سبک از قبیل بنزین و دیزل و نیز تولید گاز بیشتری برای زئولیت سنتز شده با استفاده از CTAB نسبت به نمونه‌های دیگر مشاهده شد. به علت وجود حفرات مزو و دسترسی مناسب‌تر مولکول‌های خوراک به مکان‌های فعال کاتالیستی، نمونه سنتز شده با CTAB میزان فعالیت و گاز تولیدی بالاتری را نشان داد.}, keywords_fa = {زئولیت Y,پیروفیلایت,CTAB,کراکینگ روغن سنگین}, url = {https://www.jfnc.ir/article_106136.html}, eprint = {https://www.jfnc.ir/article_106136_60671ada52523fc7befa621a626778a9.pdf} }